Tulokset hakusanalle

Pressure blasting systems - Tuonti ja vienti

17 Yritykset

0 Tuotteet

PAUL AUER GMBH

Saksa

PAUL AUER GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Mekaaninen pintakäsittely - koneet. Se on aktiivinen myös seuraavilla toimialoilla Blasting systems, Sand blasting, Abrasives, Dust extractors, Blasting cabinets, Pintakäsittely, Blasting technology, Turbine blasting technology, Dry ice blasting equipment. Sen sijainti on Mannheim, Saksa.
HAGENKÖTTER GMBH & CO.

Saksa

Space and wear parts for blasting machines. We are a leading provider of blasting machine spare parts made of highly wear-resistant cast stainless steel and hardened tool steel. In addition to direct spare parts for blast wheel turbines, our range of goods includes virtually all wear parts that are needed in blasting machines. Blast hangers made from manganese steel and other load suspension equipment for goods to be blasted are subject to extreme wear due to the continuous impact of the abrasives, which sometimes restricts their service life to just a few weeks or months. It is therefore obvious that these products must be made from highly wear-resistant manganese steel. Manganese steel blast hangers have a service life up to 20 times longer than hangers made of traditional steel. This enables much more efficient resource planning.

Verkkosivusto
SIGG STRAHLTECHNIK GMBH

Saksa

SIGG Strahltechnik GmbH, based in Jestetten in Germany, is a specialist in the production of blasting technology systems and superfinishing vibrators. In addition to the mass-produced standard equipment, the company also manufactures customised systems of any size and shape. Customers who do not have their own blasting technology system or superfinishing vibrators can commission our in-house blasting facility to produce parts. SIGG Strahltechnik supplies the most common blasting agents in a wide range of pack sizes to suit the system, starting at 25 kilograms. We strive to provide the very best quality for all systems and blasting agents. With a high degree of vertical integration and extensive expertise in all aspects of blasting technology, SIGG Strahltechnik is able to meet even the most demanding customer requirements quickly. The company represents premium quality that carries the "Made in Germany" stamp.

Verkkosivusto
HUBER GMBH & CO. KG ZUBEHÖR FÜR FUNKENEROSION

Saksa

HUBER GMBH & CO. KG ZUBEHÖR FÜR FUNKENEROSION, on Jakelija, joka toimii toimialalla Hiomalaikat. Se on aktiivinen myös seuraavilla toimialoilla Accessories for EDM, EDM accessories, EDM wire, EDM filter, Spare and wear parts for EDM machines, vaskipuhaltimet, Tungsten copper, Start hole EDMs, Start hole drilling equipment, spark erosive. Sen sijainti on Fürth, Saksa.
SÜDSTRAHL GMBH & CO. KG

Saksa

Our PowerJet series of dry ice blasters deliver even more power with an ice throughput of 40 to 150 kg/hr. Thanks to the effective single-tube system, a very hard jet can be produced, with which even the most stubborn dirt can be removed. With the new series, you can select the device that is suitable for you in a range of 1 m³ to 20 m³ air volume and an air pressure of 3 to max. 20 bar. Most recently, we have also begun manufacturing dry ice pelletizers. Our performance characteristics: German production, development and creation, over 15 years of experience with a large number of intellectual property rights, high quality standards with our own quality assurance in production and for incoming and outgoing goods, products and designs with property rights, exhibition and demonstration areas in-house, dry ice blasting systems for testing and blasting your own items in-house (by appointment).

Verkkosivusto

Sivu yrityksellesi

Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.

Lisää yritykseni

ANDREAS BERG STAHL- UND MASCHINENBAU E.K.

Saksa

Whether systems for cryogenic deburring and decoating, high-pressure washing, blasting media recovery & preparation or steel construction, welding technology, mechanical processing, sheet metal working and 3D printing – the owner-managed family business Berg Stahl- und Maschinenbau e.K. embodies first-class quality in development and production. With more than 40 years of experience we can fall back on a wide range of expertise: ■ machines for cryogenic deflashing and cryogenic decoating, special high pressure washing, blasting media recovery, coating, annealing furnace >elastomer and plastic industry ■ 3D-printing service silicone & plastics, microscopic analysis service ■ offshore constructions ■ steel constructions, soundproof cabins, cladding and coverings, machine frames, assemblies and much more ■ components for offshore technology ■ welding processes (MIG, MAG, TIG, resistance spot welding, stud welding, electric welding, welding robot systems), CNC milling machines 3/4/5-axis up to 7 m milling length, CNC lathes up to 3 m, CNC flame cutting machines, plasma and oxyfuel, CNC press brakes, hole punching machines, round roller and much more ■ surface finishing (painting, hot-dip galvanising, chromating, sand and glass bead blasting, pickling and burnishing) and much more Take profit from our broad business range! We supply worldwide.

Verkkosivusto
MATTHIAS WETZEL INDUSTRIEBESCHRIFTUNGEN GMBH

Saksa

When the optics company, Carl Zeiss, discussed outsourcing the “signage” activity, I, Matthias Wetzel, seized the opportunity and founded Matthias Wetzel INDUSTRIEBESCHRIFTUNGEN GmbH in 1999 in the form of a management buy-out. This enabled me to realise my vision of an efficient signage centre. What began with four employees has now grown to become a team of almost 40 staff. To ensure that we continue to work with specialist professionals in the future, we have provided in-house training since 2004. With the marking and varnishing of high-quality industrial products in the fields of appliance engineering, optical precision appliance engineering, systems and mechanical engineering and electronics and precision tools, our company has developed into an acknowledged surface treatment centre.

Verkkosivusto
WIWOX GMBH SURFACE SYSTEMS

Saksa

We have been supplying processes for professional tool and parts cleaning since 1984. Starting from blasting technology, through ultrasonic and injection chamber cleaning, right up to pyrolysis – our cleaning concepts offer a sterling response to the steadily growing number of new requirements arising from advanced industrial production and maintenance operations. Our customers benefit from our vertical integration and long-standing experience. They can count on us for competent advice and complete solutions that deliver maximum efficiency, tailored to their specific applications. Trials and comparative testing can be conducted in our in-house laboratory. Moreover, customers can either purchase or rent our systems, or opt for contract cleaning instead. Our most important objective is successful, satisfied customers! We achieve this goal with satisfied and highly motivated staff, coupled with a corporate culture based on partnership and mutual trust. Together, we define values such as quality and functionality in a constantly evolving process of product improvement between the manufacturer and user. Or consider economic efficiency – here, too, the high customer utility of our products helps set the standard for successful competitiveness. As a system maker and single-source supplier, including of high-quality blast media, we attach enormous importance to workplace safety and environmental sustainability. Accordingly, we accompany our customers every step of the way, from securing the necessary permits to commissioning and maintenance. We look forward to working with you!

Verkkosivusto
CRYOSNOW GMBH

Saksa

We are a manufacturer of equipment and systems for snow blasting and dry ice blasting. Our applications are manual and automated pre-treatment, cleaning, cooling and deburring using CO2 snow blasting. The innovation here is the use of liquid CO2 and compressed air. We hold national and international industrial property rights in this area. We supply high-quality CO2 blasting equipment and a wide range of accessories to customers around the world. During CO2 snow blasting, dry ice particles (solid CO2 at -78 °C) are generated from liquid CO2 in the device, and then run with compressed air via a nozzle to the surface to be cleaned. Advantages include a dry and residue-free process without water and chemicals. The CryoSnow team has decades of experience in the field of industrial cleaning and dry ice technology. Our devices and systems are "Made in Germany" and are manufactured in accordance with the applicable laws and standards according to ISO 9000. With modern design and development tools as well as innovative manufacturing processes, we convert process ideas into production-ready products within a very short time. We support customers across the world from our company headquarters in Berlin. In addition, through our sales and service partners, we have competent contact persons at your site.

Verkkosivusto
WHITE LION GMBH

Saksa

White Lion is your contact for high quality dry ice blasting systems and solutions in the surface treatment sector. Our clientele includes global leaders in the automotive industry, international industrial service providers, power stations, chemical companies and airlines, among many others. We address your needs and devise custom solutions for automated and manual cleaning with dry ice. You are always able to individually configure and customise your dry ice machines thanks to our wide range of accessories. Our dry ice systems are available around the world within 24 hours using air freight delivery. As a system supplier in this sector, we stand out thanks to our made in Germany quality, allowing you to benefit from over 25 years of experience in dry ice technology and its application. White Lion's dry ice blasting equipment and product range stand out in every respect. White Lion – the dry ice innovators

Verkkosivusto

ACCRAPLY EUROPE LTD

Yhdistynyt Kuningaskunta

No matter how your product is packaged – bottles, cans, boxes, flexible packaging and others – Accraply has an industrial labelling machine for you. We are a Barry-Wehmiller Packaging Systems company providing labelling and shrink sleeve converting equipment, specialising in pressure sensitive labellers, roll-fed labelling systems and shrink sleeve label application technology. Our trusted brands of labelling machines – Accraply, Harland, Trine and Graham & Sleevit – serve a wide variety of industries, including food and drinks, pharmaceutical, household and consumer goods, health and beauty and others. Our Stanford shrink sleeve converting equipment gives us the ability to guide our customers confidently throughout all aspects of shrink sleeve labelling technology. Accraply solutions are designed to meet the specific needs of the different markets by delivering URS Compliance, Serialisation capability, Validation/ Documentation, CFR21 compliance and are Track and eject/trace compatible solutions. Our global expertise and support, delivered locally, allows us to be a focused and responsive partner that supports all your labeling needs. Don't hesitate to contact us for more information !

Kaikki tuotteet kirjainyhdistelmällä "pressure blasting systems"

Sirius MK6 Advanced Grade Labeller

Sirius 100 -paineherkkä etiketöintijärjestelmä

Verkkosivusto Näytä kaikki tuotteet
R+S AUTOMOTIVE GMBH

Saksa

65 years of experience: Machinery and tools for the automotive industry. Today, R+S Technik is among the market leading manufacturers of tools and machines for the production of interior and exterior parts for the automotive industry. We develop flexible and individual solutions that enable our globally-active partners to produce high-quality interior and exterior parts for cars, vans and lorries.

Verkkosivusto

B + B THERMO-TECHNIK GMBH

Saksa

Since 1984, B+B Thermo-Technik gas been developing and producing innovative product and industry solutions with the highest quality standards for precise measuring jobs. Benefit from our many years of experience and expertise. We are based in the town of Donaueschingen in the south-west of Germany. From here, our quality products are distributed all around the world. The latest technologies in research, development and manufacturing and our certifications in accordance with DIN EN ISO 9001: 2015 and DIN EN 61340-5-1 mean that we produce our products to the highest quality standards. We also provide our customers with test certificates and DAkks (the German national accreditation body). calibration certificates. Quality and proximity to customers are integral parts of our strategy. This is why we predominantly manufacture in Germany and at fully owned subsidiaries all over the world. We guarantee continual quality controls, flexible responses to customer requests and modifications, as well as timely deliveries.

Verkkosivusto
POPPE + POTTHOFF MASCHINENBAU GMBH

Saksa

Poppe + Potthoff Maschinenbau GmbH develops and manufactures installations for operation and endurance testing of components in the automotive and shipbuilding sector as well as other industries. The precise and powerful special machines that this specialist for high pressure and testing technology produces, are used in research, development and production processes. This includes installations for bursting pressure and leak tests, pressure cycling testing, autofrettage as well as installations for testing the function of components. Our company, based in Nordhausen (Germany), is a member of the Poppe + Potthoff Group. As a developer of systems, we put our customers' requirements centre stage. Our focus is on technologically complex installation systems of testing and high pressure engineering. As a developer of systems, we offer everything from a single source; from concept development through to design and production (mechanical + electric) all the way to software development.

Verkkosivusto
SPECK-TRIPLEX-PUMPEN GMBH & CO KG

Saksa

The range of products from Speck-Triplex-Pumpen GmbH & Co. KG includes a large number of industrial pumps such as plunger pumps, piston pumps, dosing pumps, fluid pumps, process pumps and high-pressure pumps. Speck-Triplex pumps feature first-class workmanship. Our high-pressure plunger pumps are used in high-pressure cleaning, in machinery and plant engineering and in a number of other areas and sectors. By consistently using new materials and due to the continuous increase in flow quantities as well as pressures, pumps from Speck-Triplex can generate new possible applications. Our high-pressure pumps and aggregates are used worldwide. The company guarantees that its industrial pumps will meet customer quality standards. Thanks to state-of-the-art production facilities, Speck-Triplex high-pressure plunger pumps and aggregates are manufactured to the highest standard.

Verkkosivusto
PPS (PRESSURE PROFILE SYSTEMS)

Yhdistynyt Kuningaskunta

PPS (PRESSURE PROFILE SYSTEMS), on Valmistaja/ Tuottaja, joka toimii toimialalla Koneenrakennus - tilaustyöt. Se on aktiivinen myös seuraavilla toimialoilla Paineanturit, Mittauslaitteet ja -välineet, Mittaus- ja säätölaitteet ja -instrumentit - paineen, Mittaus- ja valvontavälineet, kennot, Paineanturit, force sensors, Kapasitiiviset kosketusanturit, tactile sensor. Sen sijainti on Glasgow, Yhdistynyt Kuningaskunta.
WOMA GMBH

Saksa

WOMA GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Puhdistus, säiliöiden ja sammioiden. Se on aktiivinen myös seuraavilla toimialoilla Machinery and systems for descaling, suurpainepumput, Paint removal systems, High-pressure water jet cleaning equipment, Cleaning systems for pipes, Machinery and systems for high-pressure water jet cleaning, High-pressure water-jet deburring, High-pressure cleaning equipment, Tank cleaning equipment. Sen sijainti on Duisburg, Saksa.

Löydä tarjouksia

Suodattimet

Tulokset hakusanalle

Pressure blasting systems - Tuonti ja vienti

Tulosten määrä

17 Yritykset