Tulokset hakusanalle

Gas control systems - Saksa

16 Yritykset

0 Tuotteet

E.I.TEC. GMBH ENERGIE- UND UMWELTTECHNOLOGIE

Saksa

Founded in 1995 by fellow engineers Frank Grosch and Ralph Wolfrum, the company has come to focus on designing, building, fully installing and commissioning systems for flue gas purification and energy recovery. Our systems are being put to work not only in western and eastern Europe, but also in North America, Asia and Australia. Our technical team is made up of process technology engineers, fluid mechanical engineers and electrical engineers, as well as chemists, physicists, designers, technicians and draughtsmen, all of whom are experts in their field. To ensure our high quality standards are maintained, our systems are subject to continuous checks and interim acceptance tests during production. This results in high levels of availability and safety in our systems.

Verkkosivusto
BORSIG GMBH

Saksa

The BORSIG Group's head office is BORSIG GmbH, based in Berlin. Strategic management focuses on three areas: Group development, product and market strategies, production structures, target formulation and pursuit, financial management and controlling, personnel management. BORSIG is synonymous with quality, reliability and innovation from Germany. Our highly qualified engineers and technicians face the challenge of developing only the best systems and machines, manufacturing them and assembling them at their destination. This means that our products are efficient and reliable even under the most difficult conditions and are an investment in the future. Each of our production sites in Berlin, Gladbeck and Meerane has its own outstanding qualities. What they all have in common is that they are equipped with state-of-the-art technologies, innovative manufacturing processes and quality testing and control that is independent of production and product lines.

Verkkosivusto
INDUSA GMBH

Saksa

INDUSA GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Suodatuslaitteet ja -tarvikkeet. Se on aktiivinen myös seuraavilla toimialoilla Extraction systems for work places, Aspiration systems for emulsion mist and oil mist, Extraction systems for eroding machines, sähkösuodattimet, Emulsion mist collectors, Emulsion mist filter, suodatuskerrokset, Non-woven filter materials, Air filtration systems. Sen sijainti on Neu-Anspach, Saksa.
SELECTA BIOENERGIE GMBH

Saksa

SELECTA BIOENERGIE GMBH, on Palveluntarjoaja, joka toimii toimialalla Biologiset kaasut ja polttoaineet - energiakäyttö. Se on aktiivinen myös seuraavilla toimialoilla Kaasusuodattimet, Biogas plants, Activated carbon filters, Air filters, activated carbon, Exhaust air filters, Components for biogas plants, Kaasusuodattimet, Biofilters for waste air purification. Sen sijainti on Krayenberggemeinde, Saksa.
SPECTRON GAS CONTROL SYSTEMS GMBH

Saksa

SPECTRON GAS CONTROL SYSTEMS GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Kaasu ja öljy - hyväksikäyttö. Se on aktiivinen myös seuraavilla toimialoilla Putkityöt, teollisuus, Hanat - säädettävät ohjaimet, Voiteluaineet, teollisuuden, Kaasut, paine- ja neste-, Putkityöt, teollisuus, Hanat - säädettävät ohjaimet, Voiteluaineet, teollisuuden, Kaasut, paine- ja neste-. Sen sijainti on Frankfurt, Saksa.

Sivu yrityksellesi

Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.

Lisää yritykseni

CARL CROONEN GMBH MARINE DIESEL TECHNICS

Saksa

With almost 100 years of experience. Now managed in its fourth generation, our company has specialised in the global distribution of high quality spare parts for diesel and gas engines. We provide technological progress from the heart of development. Benefit from our direct links with industry, combined with our high flexibility in all areas. Our products.: Spare parts for diesel and gas engines, attachments and spare parts, components for control systems, control and monitoring systems, drive technology and seal manufacturing.

Verkkosivusto
AGROMATIC REGELUNGSTECHNIK GMBH

Saksa

The electric actuators from Agromatic are perfectly suited to all areas of industry for moving, regulating and controlling valves. Since 1972, we have been specialists in electromechanical actuators, becoming one of the leading providers in our field. Our international customers are mechanical and systems engineers from all kinds of industrial sectors. Agromatic develops and offers a wide range of electric actuators, produced exclusively in our plant in Oerlinghausen, East Westphalia, and developed and suited to the individual and specific requirements of our customers. Our sales team is happy to offer advice and answer your questions. Agromatic actuators are long-lasting and reliable with low maintenance costs. Wherever regulation and control of gas, liquid or solid inflow is required, our actuators ensure safety in even the most difficult climatic conditions and extreme temperatures.

Verkkosivusto
MP GMBH MONTAGE- UND PRÜFSYSTEME

Saksa

MP GmbH Montage- und Prüfsysteme was established in 1990 and develops and produces bespoke machines for assembly, measuring and testing processes, tailored to customer requirements. For the assembly machines, we use our modular system with custom process design. Our MP joining press, process controller (traceability) and dosing quantity tester are hugely popular among are customers and are put to use in many applications. Our clients, who include AAM, Biotronik, BMW, Bosch, Continental, Daimler, Häfele, Linamar, Magna, Nidec, Oerlikon, Stihl, Volkswagen, ZF and many more, operate in the fields of automotive manufacture, medicine, furniture and garden tools. We support our clients through our extensive expertise in the assembly and testing of gearboxes, exhaust gas recirculation coolers, camshaft modules, viscous dampers, automotive pumps, artificial pacemakers, colostomy bags, dowels, hedge trimmers, etc. and have previously supplied to clients in Brazil, China, Mexico, Thailand and the USA.

Verkkosivusto
AZ INTEC GMBH

Saksa

AZ INTEC GmbH – your certified partner since 1979. We are a family business focused on production, development and OEM. We offer a full range of products and solutions for a multitude of applications. You can get all the parts individually or in customized plug & play assemblies which are ready for your production line. Products: • Shut-off and control valves• Fittings and valves• Pre-assembled hoses made of elastomer (rubber and plastic)• Stainless steel corrugated pipes and hoses• Pre-insulated solar hoses• CATS® – assembly system• Other assembly systems. Media: • Fuel gas• Technical gases• Oxygen• Drinking water. You can find our products and assemblies in use in: • Heat exchangers• Medical applications• Respiratory protection• Renewable energy• Solar panels• Heating and cooling applications• HVAC• District heating• Automotive industry• Building services engineering• Chemical industry• Trace heating• Security technology• Domestic installations (water and gas) – CATS® self-assembly system

Verkkosivusto
ELT ENTSTAUBUNGS- UND LUFTTECHNIK GMBH

Saksa

Our aim is not only to identify each individual technical task but also to work towards comprehensive solutions while keeping cost-effectiveness, amortisation, safety and environmental sustainability in focus. The benefit for you is our speed. ELT was founded in 1996 by two engineers whose experience is based on 30 years of working in the ventilation and dust removal technology sector. Thanks to our flexibility and technical expertise, we have been able to construct installations in a variety of sizes both in Germany and abroad. Our strength lies in the cohesion of our company with close collaboration between customer consultation, detailed planning, preparation and professional installation.

Verkkosivusto

WENZ KUNSTSTOFF GMBH & CO. KG

Saksa

WENZ Kunststoff GmbH & Co.KG has worked in the field of plastics technology since 1997. As a specialist in heating and cooling technology, materials drying, separating, de-dusting and material conveyance, we offer our customers personal advice on all plastics processing matters. Having taken over representation of the Regloplas temperature control devices forms the basis of our future development. Our desire for innovation leads to the development of new technologies such as the qip® dryer and the Cycletemp® Vario, Impuls and Flow as special temperature control alternatives. With regard to centralised materials supply, we have developed an idea with the coded coupling station, which has become our eighth patent. We currently have the best technologies on the market. Project planning, project development and the construction of conveyor and drying systems for plastics. We not only have a strong relation to the mid-sized sector, we have the flexibility to service companies of every size. With sustainability in mind, we also upgrade old materials handling systems to a new technological level – without any new construction and independent of both age and manufacturer. Our customers enjoy a massive advantage in terms of efficiency, energy, the environment, system integration and costs. Our offer is rounded off with the accessories of our own Talkob and Mouldpro brands – temperature control couplings and hoses, cleaning granulates, flow meters and much more.

Verkkosivusto
CONDUCTIX-WAMPFLER GMBH

Saksa

The core activity of Conductix-Wampfler is the development, production, installation and servicing of systems providing a tailor-made solution for power and data transmission to mobile equipment and machinery. In addition to its undisputed industry expertise, the company is characterised by its technical competence and innovative strength: All energy and data transmission technologies in common use today, such as cable trolley systems, conductor rails, spring cable reels, motorised cable reels, slip ring elements, through contactless energy supplies, battery charging solutions and battery management systems to safety radio remote controls and mobile controls are brought together under one roof. For customers, this means product-neutral advice and optimum technical implementation of numerous applications in the fields of industry, event technology and passenger transport, all from a single source.

Verkkosivusto

GEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG

Saksa

GEMÜ is a world-leading manufacturer of valve, measurement and control systems. The independent family-owned company with a global focus has become established in key areas for more than 50 years as a result of innovative products and customer-specific solutions for controlling process media. GEMÜ is the world market leader in sterile applications for pharmacy and biotechnology. The group currently employs 900 members of staff in Germany and over 1600 around the world. Its products are manufactured at six production sites in Germany, Switzerland, China, Brazil, France and the USA. Global sales are coordinated from Germany with 27 subsidiaries. The group is active on all continents through a dense network of trading partners in more than 50 countries. GEMÜ will establish an increased presence in future markets with its international growth strategy.

Verkkosivusto Näytä kaikki tuotteet
BERNSTEIN AG

Saksa

BERNSTEIN AG, headquartered in Porta Westfalica, looks back on an eventful past that is linked directly to Germany’s most recent history. In 1947 Hans Bernstein founded the company “Hans Bernstein Spezialfabrik für Schaltkontakte”, from which BERNSTEIN AG – today operates internationally – emerged. The family owned company is now in it’s third generation and today employs more than 500 people in 10 countries. In-depth market knowledge, the close proximity to end users, as well as years of experience in mechanical engineering and electronics, are reflected down to the last detail in our products. Against this backdrop, BERNSTEIN ranks among the world’s leading providers of industrial safety and enclosure technology. With our comprehensive range of switches, sensors, enclosures and operator terminals and suspension systems, we offer our customers effective and versatile solutions. By conforming to international safety and machine guidelines, our products perfectly integrate in individual system solutions.

Verkkosivusto
IM ENVIRONMENTAL EQUIPMENT GERMANY GMBH

Saksa

IM ENVIRONMENTAL EQUIPMENT GERMANY GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Kaasunilmaisu - valvontalaitteet. Se on aktiivinen myös seuraavilla toimialoilla pakokaasuanalyysit, kaasuvuotojen ilmoitusjärjestelmät. Sen sijainti on Heilbronn, Saksa.
FILLTECH GMBH

Saksa

FILLTECH GMBH, on Multi-Category, joka toimii toimialalla Pullotus ja täyttö - koneet ja laitteet. Se on aktiivinen myös seuraavilla toimialoilla täyttökoneet, pullotuslaitteet, Tehtaiden rakennus, kaasuasennukset. Sen sijainti on Warburg, Saksa.

Löydä tarjouksia

Suodattimet

Tulokset hakusanalle

Gas control systems - Saksa

Tulosten määrä

16 Yritykset