Tulokset hakusanalle

North engineering - Saksa

8 Yritykset

0 Tuotteet

GGB

Saksa

GGB helps create a world of motion with minimal frictional loss through plain bearing and surface engineering technologies. With R&D, testing and production facilities in the United States, Germany, France, Brazil, Slovakia and China, GGB partners with customers worldwide on customized tribological design solutions that are efficient and environmentally sustainable. GGB’s engineers bring their expertise and passion for tribology to a wide range of industries, including automotive, aerospace and industrial manufacturing. To learn more about tribology for surface engineering from GGB, visit www.ggbearings.com. GGB is an EnPro Industries company (NYSE: NPO). Local contacts (North America and UK): GGB North America Factory I 700 Mid Atlantic Parkway PO Box 189 USA-Thorofare, New Jersey, 08086 Tel. +1 856 848 3200 Fax +1 856 848 5115 usa@ggbearings.com GGB North America Factory II 1414 Metropolitan Avenue PO Box 189 USA-Thorofare, New Jersey, 08086 Tel. +1 856 848 3200 Fax +1 856 848 5116 usa@ggbearings.com GGB UK Subsidiary of GGB Heilbronn GmbH Ochsenbrunnenstraße 9 D-74078 Heilbronn Tel. +44 7496 097815 greatbritain@ggbearings.com

Verkkosivusto
E.I.TEC. GMBH ENERGIE- UND UMWELTTECHNOLOGIE

Saksa

Founded in 1995 by fellow engineers Frank Grosch and Ralph Wolfrum, the company has come to focus on designing, building, fully installing and commissioning systems for flue gas purification and energy recovery. Our systems are being put to work not only in western and eastern Europe, but also in North America, Asia and Australia. Our technical team is made up of process technology engineers, fluid mechanical engineers and electrical engineers, as well as chemists, physicists, designers, technicians and draughtsmen, all of whom are experts in their field. To ensure our high quality standards are maintained, our systems are subject to continuous checks and interim acceptance tests during production. This results in high levels of availability and safety in our systems.

Verkkosivusto
DYNATECT EUROPE GMBH

Saksa

Dynatect-MFB is one of the leading providers of equipment protection and offers a comprehensive range of industrial equipment protection products with custom solutions for all sectors. The parent company DYNATECT Manufacturing Inc. (formerly A&A Manufacturing Co. Inc.) is the leading manufacturer of dynamic equipment protection in North America, with headquarters in New Berlin, Wisconsin. Gerald O'Rourke, founder of today's DYNATECT Group, initially manufactured bellows covers and various products made of plastic-coated fabrics for the machine and tool industry in the initial phase of the company in 1945. Today, with five production sites and around 500 employees, DYNATECT is a growing global company and the first point of contact for effective protective systems in the following markets: Machine tools and automation, medical engineering, transport/traffic engineering, maintenance, building and construction/agriculture, as well as oil and gas.

Verkkosivusto
BLICKLE RÄDER+ROLLEN GMBH U. CO. KG

Saksa

Blickle is one of the world's leading producers of wheels and castors. The company stocks over 30, 000 different products in its standard range. Blickle develops special solutions for special requirements. Today, the company produces more than 15 million wheels, swivel and fixed castors annually. The wheels and castors can be used in all kinds of machinery and transportation devices, such as in intralogistics, mechanical and plant engineering and the food industry. The company was founded in 1953. Blickle initially manufactured wheelbarrow wheels. This resulted in a range of high-quality wheels, swivel and fixed castors. In 1967, the first overseas sales company was established. Today, Blickle is represented by 21 dedicated sales companies in Europe, North America, Asia and Australia, as well as by exclusive agencies in over 120 countries worldwide.

Verkkosivusto
PETER PRINZING GMBH

Saksa

Peter Prinzing GmbH is a medium-sized, family-run engineering company with a long history and its roots in the heart of the Swabian Jura. The new, strategically advantageous location of the company in the centre of Europe, at the meeting point of two major highways that connect the North to the South and the East to the West, is perfect for delivering products to every corner of the world. This tradition-conscious family business is currently being successfully run by the fourth generation of the Prinzing family. Over one hundred years ago, a small smithy in Urspring was working metal. That small smithy has grown into a company with two main areas of business: Sheet metal machining equipment and dung removal systems. Even though these segments are very different, they do have one thing in common: Peter Prinzing GmbH is a market leader in both.

Verkkosivusto

Sivu yrityksellesi

Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.

Lisää yritykseni

HNP MIKROSYSTEME GMBH

Saksa

precise pumps – smart solutions HNP Mikrosysteme develops, manufactures and markets pumps worldwide. These micro annular gear pumps (mzr®-pumps) are used where fast and highly precise dosage is required. Five pump series enable: - a minimum dosage volume of 0.25 µl - a flow rate range from 1 µl/h to 1152 ml/min - pressure up to 150 bar These pumps stand out for their pulseless delivery, minimal dead volume, long service life, small dimensions, highly resistant materials and ease of maintenance. Furthermore, we offer individual application advice as well as filling and dosing systems for the following areas: - mechanical and plant engineering - chemical and pharmaceutical process engineering - medical and analytical instrumentation Every metering application brings new challenges. We look forward to your inquiry and will thoroughly discuss your application as well as advise you in detail regarding pumps, systems, filters, controls, sensors and much more. HNPM is based in Schwerin (in the North of Germany). Round about 90 employees work in construction, development, quality assurance and assembly or at our technical sales team, consisting of engineers and scientists.

Verkkosivusto
ZERMOTECH GMBH

Saksa

With its head office in Lauenburg/Elbe, ZERMOTECH GmbH is a medium-sized company specialising in machining technology in the turning and milling sector for over 20 years. As a mechanical engineering supplier and contact manufacturer, we work with our modern CNC and conventional machines to a very high quality standard. Calling on innovative and flexible machining processes, we manufacture products to Industry 4.0 level, with a high degree of repetition accuracy even in the very smallest tolerance ranges. From the cutting of different materials such as aluminium, brass and plastic to special steels, we have in particular specialised in processing corrosion-resistant steels. We manufacture individual and series parts as well as highly-complex components for the mechanical engineering and automotive sectors, research and development, prototype construction and the aerospace sector. As a strong partner in the north of Germany and beyond, our customers include well-known engineering companies in the food and pharmaceuticals sectors. We also offer installation services for individual or entire assembly units. Furthermore, we provide a metal finishing service using different processes such as pickling, electrolytic polishing, coating or hardening. If we have aroused your interest and you are looking for a strong, reliable partner to accompany your activities, our team will be delighted to hear from you. We are here for you, even at short notice.

Verkkosivusto
UNIFLEX-HYDRAULIK GMBH

Saksa

In 1972, the machine builder and graduate engineer Peter Schröck established Uniflex-Hydraulik GmbH in Frankfurt/Main. Owing to pioneering innovations and extraordinary product quality, the flourishing enterprise soon developed into a global provider of machines for hose production. Uniflex-Hydraulik GmbH became a member of Freiherren Waitz group in 1992. This laid the foundation for further growth: in 1996, the company occupied a new, larger office and production building in Karben, 10 km north of Frankfurt. The subsidiary UNIFLEX of America LLC. with its present registered office in Schaumburg near Chicago, Illinois, was established in 1998 to support the markets in the Americas. In June 2004, UNIFLEX opened a subsidiary in Singapore from where our Asia-Pacific customers are served. We are also represented by offices in Tangerang/Indonesia and Shanghai/China since 2007 and 2009, respectively. Today, after 40 years, UNIFLEX is a system provider in hose production – from workshop equipment to production plants. Innovative and reliable as well as durable hose crimpers, cutting machines, pin prick tools, skiving machines, marking tools, test systems, software and cleaning machines have been and are being developed and marketed in close cooperation with leading hose manufacturers and users.

Verkkosivusto

Löydä tarjouksia

Suodattimet

Tulokset hakusanalle

North engineering - Saksa

Tulosten määrä

8 Yritykset