Tulokset hakusanalle

Control electric - Tuonti ja vienti

1 257 Yritykset

3 Tuotteet

CONTROL ELECTRIC SÀRL

Sveitsi

CONTROL ELECTRIC SÀRL, on Palveluntarjoaja, joka toimii toimialalla Runkotyöt - rakentaminen. Se on aktiivinen myös seuraavilla toimialoilla Sähkötyöt, Sähkölaitteet, Kotitalouskoneet - suuret, Laadunvalvonta ja sertifiointi, Sähkötyöt, Sähkölaitteet, Kotitalouskoneet - suuret, Laadunvalvonta ja sertifiointi. Sen sijainti on Monthey, Sveitsi.
UNIVERSAL HYDRAULIK GMBH

Saksa

Innovative systems determine the market of tomorrow. This is the principle which Universal Hydraulik has been following for more than 35 years when designing hydraulic systems, cooling systems, and heat exchangers, which are used all over the world in every field of application. Our heat exchangers are available as standard products, or can be specially customised to meet the requirements of your application. We use highly-precise software for our calculations, with drawings available in 3D. Our heat exchangers are tested up to five times during production. The cooling performance can be verified on our test rig. By purchasing one of our hydraulic and cooling systems, you'll be provided with a turnkey system from a single source. We design, manufacture, install and commission the complete system. All our systems are fully tested with regard to functionality and workmanship prior to delivery and are supplied with extensive documentation.

Verkkosivusto
OBERLAUSITZER ELEKTRO-SCHALTGERÄTE GMBH

Saksa

OBERLAUSITZER ELEKTRO-SCHALTGERÄTE GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Automaatio - järjestelmät ja laitteet. Se on aktiivinen myös seuraavilla toimialoilla SÄHKÖLAITTEET, jakokeskukset, SÄHKÖLAITTEET, Mounting and inspection of printed circuit boards in small series, Low-voltage industrial electrical systems, Electronic control systems for machinery and plant construction, Assemblies for industrial electronics, Automatic control systems, Measuring and locating services. Sen sijainti on Weißenberg, Saksa.
FLEXTEC GMBH

Saksa

flextec GmbH is a medium-sized company that was founded in 2005 by today's shareholder and director Alexander Fritz. It was a logical further development that emerged from the success of Fritz Elektronik e.K., which had already existed since 1996. In the field of electrical engineering and electronic equipment, we have specialised in the development and manufacture of customer-specific products as custom production/prototypes or small batches, complemented by the associated services. Specifically, the flextec range currently includes: Customer-specific manufacture of cables and cable harnesses, laying out and fitting printed circuit boards (SMD, classic), development of hardware and software for electrical and electronic test equipment, construction and manufacture of mechanical devices incl. housing, manufacture of customer-specific electrical measuring equipment.

Verkkosivusto
JS INTEGRAL SP. Z O.O.

Puola

JS Integral sp. z o.o. produces and prefabricates: control and automation cabinets, control panels for machines and devices (self-propelled and stationary), cable boxes and cabinets for mining, cable metering boxes. Our company also manufactures metal enclosures and constructions: enclosures for electrical, electronic or telecommunication equipment, including control cabinet enclosures, control panel enclosures etc; gas cabinets and access doors, storage cabinets, access doors and casings, etc.

Kaikki tuotteet kirjainyhdistelmällä "control electric"

Ohjauskaapit

Ohjainpaneeli - paikallaan olevat koneet ja laitteet

Ohjainpaneeli - itseliikkuvat koneet

Verkkosivusto Näytä kaikki tuotteet

Sivu yrityksellesi

Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.

Lisää yritykseni

COSTRUZIONI ELETTROTECNICHE CEAR SRL

Italia

COSTRUZIONI ELETTROTECNICHE CEAR SRL, on Valmistaja/ Tuottaja, joka toimii toimialalla Ohjainpaneeli - sähkö. Se on aktiivinen myös seuraavilla toimialoilla sähkötaulujen suunnittelu, electronic industrial automation, sähkölaitteiden suunnittelu, transformer substation for mines and quarries, sähköiset ohjaus- ja valvontataulut, electric transformer and control cabinets, energianjakelusähkötaulut, prefabricated electrical cabinets, design of automated electrical systems. Sen sijainti on Gessate, Italia.
CTP CHEMISCH THERMISCHE PROZESSTECHNIK GMBH

Itävalta

CTP CHEMISCH THERMISCHE PROZESSTECHNIK GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Ilmastointi-, tuuletus- ja ilmanvaihtolaitteet. Se on aktiivinen myös seuraavilla toimialoilla Pilot systems, Industrial exhaust air purification, NOx, Dioxins & furans, Emission control systems, Air pollution control systems, Exhaust air purification systems, catalytic, Absorption systems, Systems for selective catalytic reduction (SCR). Sen sijainti on Graz, Itävalta.
EVG ELEKTRO-VERTRIEBS-GESELLSCHAFT MARTENS GMBH & CO. KG

Saksa

EVG ELEKTRO-VERTRIEBS-GESELLSCHAFT MARTENS GMBH & CO. KG, on Tukkukauppias, joka toimii toimialalla Liittimet, sähkö-. Se on aktiivinen myös seuraavilla toimialoilla Katkaisimet, Säätörasiat - sähkön, Connectors, Axial fans, aksiaalituulettimet, sähkömekaaniset komponentit, Tuulettimet sähkötekniikkaa varten, Katkaisimet, koaksiilijohtolaitteistot. Sen sijainti on Mönchengladbach, Saksa.
E.C.W.

Belgia

E.C.W., on Palveluntarjoaja, joka toimii toimialalla Automaatio - järjestelmät ja laitteet. Se on aktiivinen myös seuraavilla toimialoilla sähköinen ohjaus. Sen sijainti on Hulshout, Belgia.
ROTORK MOTORISATION SAS

Ranska

ROTORK MOTORISATION SAS, on Valmistaja/ Tuottaja, joka toimii toimialalla Hydrauliset laitteet. Se on aktiivinen myös seuraavilla toimialoilla Putkityöt, teollisuus, Putkityöt, teollisuus, moottorointi, sähköinen ohjaus. Sen sijainti on La Courneuve Cedex, Ranska.

ACT MOTOR GMBH

Saksa

ACT MOTOR GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Elektroniikkakomponentit. Se on aktiivinen myös seuraavilla toimialoilla Askelmoottorit, sähköinen ohjaus, 3D-tulostin, CNC-työstö. Sen sijainti on Bremen, Saksa.
A&M AUTOMATIK UND MASCHINENBAU

Puola

A&M AUTOMATIK UND MASCHINENBAU, on Palveluntarjoaja, joka toimii toimialalla Automaattiset ohjauslaitteet. Se on aktiivinen myös seuraavilla toimialoilla automatiikat, sähköinen ohjaus, teollisuuslaitteiden hallinta. Sen sijainti on Syrynia, Puola.

PERGEL METAL

Turkki

In Tuzla Orhanli, in a production area of 150 m2, Jib Industrial Metal Electronic Device Boxes San. and tic. Ltd. Şti.it started its activities with its name and initially managed to meet the needs of companies operating in various fields such as industrial weighing systems, telecommunications, defense industry in terms of mechanical forming. In line with our vision and mission values, we have invested in the first CNC press brake, twist, and then laser cutting machine with the demands of our customers. In 2016, we moved to the CHEMISTS INDUSTRIAL ESTATE with an indoor area of 2, 000 m2 and an outdoor area of 2, 000 m2. In addition, we have allocated 800 m2 of the section as an electro-static powder coating area. Using state-of-the-art chemicals with automatic spray washing line and robot guns, quality continues its march in line with its first goal. In a short time, with its perseverance and diligence, it has established itself as an approved supplier of the leading companies in the sector. Our young and experienced staff has adopted the quality concept as its primary goal in metal forming and dressing and has made serious investments to produce quality products. The new machine park and its new construction will not give up customer satisfaction and quality understanding as a target in the next process. Our first priority to ship to all our customers in the understanding of producing quality products, timely products and affordable prices. Do not hesitate to contact us !

Verkkosivusto
KELLER PRESSURE

Sveitsi

KELLER – A market leader in the production of isolated pressure transducers and transmitters KELLER Pressure was established in 1974 by Hannes W. Keller, the inventor of the integrated silicon measuring cell. Today, his sons Tobias and Michael Keller run the business. The company is wholly family-owned and employs 480 staff. KELLER feels a strong connection to its home of Switzerland. Its headquarters are where the value is added and where most of our employees work. As a result, all KELLER products bear the quality seal 'Made in Switzerland' and embody the Swiss values of quality, functionality and reliability. KELLER Druckmesstechnik AG, including KELLER Gesellschaft für Druckmesstechnik mbH in Jestetten, is certified to ISO 9001. This means that our measured values can be fully traced to national standards. As a company that operates on an international scale, KELLER is represented at a number of locations around the globe. Because we are committed to offering the best service to our customers, you will always receive advice in your local language. KELLER has ten branches in Europe, Asia, South America and the USA. Various representatives and distributors also support our branches in other countries.

Verkkosivusto
OHMEX INDUSTRIELLE ELEKTROWÄRME GMBH

Saksa

OhmEx Industrielle Elektrowärme GmbH designs, and supplies customer-specific electric process heaters and electric switchboards for use in safe areas and explosion-protected zones according to ATEX and IECEx. These process heaters carry the CE marking in compliance with current CENELEC standards and comply with the applicable IEC standards. Our main areas of expertise and services are as follows: Consultation (feasibility study/economic viability study/quotation), planning (design planning/3D model/thermodynamic calculations/design testing), production (mechanical production/welding/electrical work/pressure tanks/acceptance, e.g. TÜV/final inspection), commissioning (documentation/personnel training). Together with our external production partner, Mainsite Technologies GmbH, we create the preconditions required for efficient, innovative and inexpensive product solutions. Top quality is our standard.

Verkkosivusto
RAFI GMBH & CO. KG

Saksa

RAFI develops and produces electromechanical structural elements and operating systems for human-machine interaction as well as electronic assemblies and devices. Our product range of electromechanical structural elements includes short-stroke push buttons, push buttons and control switches (e.g. emergency stop). As part of our range of systems, we offer customer-specific input systems such as glass and membrane keyboards and touchscreen systems, including electronic equipment and electronic interfaces for inputs, switching and displays. Contract manufacturing of customer-specific electronic assemblies and devices, including procurement of components worldwide, testing and after-sales service, is consolidated in our EMS (Electronic Manufacturing Services) department.

Verkkosivusto
FERGO ARMATUREN GMBH

Saksa

With FERGO Armaturen GmbH, you have a professional and reliable partner in the control engineering sector. We would be happy to advise you on all types of slide valves, shut-off and check valves, as well as pneumatic and electric actuators. Naturally we also offer comprehensive solutions with regard to peripheral devices – for example solenoid valves, positioners, limit switch boxes and many more; no matter under what conditions and for what industrial application our products are required. We take care of it – that is our company philosophy. Complete customer satisfaction is a top priority at FERGO Armaturen GmbH. High-quality components and materials, favourable terms, as well as minimal processing and delivery times help us to exceed our customers' high demands again and again. Put us to the test. We develop flexible solutions in the shortest possible time, tailored to your individual needs.

Verkkosivusto
CEG ELETTRONICA INDUSTRIALE

Italia

CEG Elettronica Industriale was founded in 1965 as a manufacturer of medium- and low- voltage electric switchboards, firstly as a small business, then on an industrial scale. In 1984 it installed the first direct current power station, which enabled CEG to act as a supplier of battery charging rectifiers for industrial use and therefore to diversify its offer. For more than fifty years, CEG has stood for reliability, professionalism and innovation.

Verkkosivusto
BMR GMBH

Saksa

Rudolf M. Brittling founded BMR, which is based in Schwabach in Bavaria, in 1978. The initial focus of the business was on manufacturing products for Triumpf Adler office suppliers and the Lehmann-Eisenbahnen model railways. At the same time, the company set up its electronics manufacturing and developed its own electronic control systems. In 1988, BMR took over a big share of switch manufacturing at the Sasse group, providing itself with a second pillar of work. At this time, the production range included pump control systems for lubricating heavy good vehicles and battery chargers, for example. The incorporation of the frequency converter product area in 1990 was of crucial importance. Today, BMR GmbH is a specialist in the manufacture of static frequency converters for motor spindles in the power range of 100 VA to 3.5 kVA and for speeds of up to 150, 000 rpm and more, as well as for high and low voltage types. The company is the market leader in the low voltage range and serves customers not only in Germany and Europe but across the whole world.

Verkkosivusto
MOOG GAT GMBH

Saksa

Moog GAT GmbH is your reliable partner for rotary unions, slip rings, air bearings and torsion motors for high-performance applications.

Verkkosivusto

EDIT ELEKTRONIK SIST SAN VE TIC LTD STI

Turkki

Edit Electronic was established in 1995 to develop professional solutions for industrial and commercial applications and to produce Voltage and Power Management Devices. The production, which started with Voltage stabilizers and Industrial battery chargers, diversified and developed with the innovative vision of our R&D engineers and the efforts of our dynamic production staff. We manufacture Automatic Voltage Stabilizer, Dynamic Voltage Stabilizer, Battery Charger, Network Simulator, Adjustable Voltage Source and Power Transformers in our factory in İstanbul-Turkey. 2020, we have started to produce 80% of the parts of the products within our own structure. Aesthetic and durable enclosures, Customer-specific 3D design opportunity. Easy-to-assemble free standing modular cabin technology, With our knowledge and field experience, we develop new products and new solutions for all your enclosure needs. We produce Free Standing Modular Cabinets, Wall-mounted Electrical Distribution Panels, Outdoor Rack Cabinets, Stainless steel and aluminum cabinets, Monoblock Device Boxes and Machine Control Consoles… We deliver our products, which we produce using advanced technologies, to all over the world. Our R&D and Production engineers use the latest technologies to increase product performance, operating safety and energy efficiency. We are working to provide the best solutions with many years of knowledge and field experience.

Verkkosivusto
DEMTE ELEKTRIK METAL SANAYI

Turkki

Welcome to DEMTE, your premier destination for high-quality din rail and profiles designed for electrical panels and installations. With a decade of expertise in the electrical products industry, we take pride in providing comprehensive solutions tailored to your unique projects. Explore our diverse product range, including W Automate Din Rail, Din Rail Cutter, Junction Box, Distribution Boards, Box Abs, Industrial Boxes, Manhole Boxes, Cable Ducts, Flexible Spiralled Sheath, Box Metal, Box Polyester, DT Accessories, Stabilizer, Insulated Flexible Copper Bars, and more available on our website! At DEMTE, we recognize the uniqueness of each project. Our dedicated team of experts is committed to crafting customized solutions that align with your specific requirements. Enjoy cost-effective solutions without compromising on quality, as DEMTE offers competitive prices to ensure you receive the best value for your investment. Proudly serving customers globally, we deliver our high-quality products right to your doorstep. Wherever you are, DEMTE is dedicated to meeting your electrical needs. Our commitment to excellence goes beyond the ordinary; we not only provide top-notch products but also ensure they reach you in perfect condition, reflecting our meticulous packing details and quality labels. Experience exceptional customer service from the moment you reach out to us. We highly value our customers and prioritize your satisfaction. Contact us for more details !

Verkkosivusto
ELECTROALFA

Romania

Electroalfa is a Romanian (East European) industrial group that offers design, production and delivery of a wide range of electrical as well as advanced sheet metal products. With a global net of customers, active in a variety of different areas such as: Energy (Low voltage Power Centers &Motor Control Centers, primary and secondary distribution switchgears, prefabricated power stations, wind power converter cabinets) Railway vehicles (traction and energy storage cabinets, EMU/DMU/ HVAC cabinets) E-mobility (ultra-fast charging stations, high-power enclosures) Machine building (including plastic injection, milling, tower cranes) Telecommunications (network trackside and signal cabinets). A wide variety of processes, tools and equipment that can satisfy the needs of the most demanding customers: we use a complete line of technologies for sheet metal production: laser cutting, punching, bending, welding, powder & wet painting, Zinc plating, PU gasketing, assembly. We are processing mild, aluminized, galvanized, stainless and aluminium sheets and profiles. Our team efforts are focused on product optimization and cost efficiency, in order to provide the best quality. Our engineers and project leaders can help you design solutions for specific needs, delivered on time and in the best possible quality. We work with Solid Works 3-D models, as well as other file formats. Our company is certified according to EN 15085 CL 1 for welding process and ISO 9001, ISO 14001, OHSAS 18001.

Verkkosivusto
COSTRUZIONI METALMECCANICHE VALENTE

Italia

Construction and manufacture of conveyor belts and chain conveyors, roller conveyors, screw conveyors, construction of bucket elevators, fabrication of roller conveyors, assembly of industrial systems, sheet metal processing, structure built to plan, construction of metal structures, production systems for cellular rubber for insulation, manufacture of automated cutting machines.

Verkkosivusto
WALTHER-PRÄZISION

Saksa

Since 1951, WALTHER-PRÄZISION, Carl Kurt Walther GmbH & Co. KG (est.1931), has been developing and manufacturing mono and multi couplings, as well as docking systems that are used wherever liquids, vapours, gasses, electrical and optical signals and electric power have to be transferred and separated. Quick couplings are available in nominal sizes of DN 2 to DN 100, at operating pressures from vacuum to 2000 bar, also in clean-break, full-flow or breakaway technology.

Verkkosivusto
STIL ELEKTRONIK

Turkki

STIL ELEKTRONIK, on Valmistaja/ Tuottaja, joka toimii toimialalla Passiiviset sähkökomponentit ja painetut piirilevyt. Se on aktiivinen myös seuraavilla toimialoilla Silkkipainanta muoville ja PVC -lle, Elektroniikkakomponentit, Ohjauskytkimet - sähkö, Litteät paneelinäytöt, Plastic products for the electrical industry, sähköpiano, kosketusnäyttö, Membrane keypad, Upokkaat kelalla. Sen sijainti on Istanbul, Turkki.
CD AUTOMATION

Italia

CD AUTOMATION, on Jakelija, joka toimii toimialalla Kuivaajat, teolliset. Se on aktiivinen myös seuraavilla toimialoilla Teollisuusuunit, motor soft starters, FUJI ELECTRIC, Teollisuusuunit, inductive loads, resistive elements, flexography, technical industrial ovens for heat treatment, panel indicators. Sen sijainti on Legnano, Italia.
L-OMEGA

Ranska

L-OMEGA, on Palveluntarjoaja, joka toimii toimialalla Sähkökomponentit ja -osat. Se on aktiivinen myös seuraavilla toimialoilla automatiikat, sähköautomatiikat, automaattiset teollisuusprosessit, metallurgia. Sen sijainti on Longvic, Ranska.
CONTA-CLIP VERBINDUNGSTECHNIK GMBH

Saksa

CONTA-CLIP VERBINDUNGSTECHNIK GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Releet. Se on aktiivinen myös seuraavilla toimialoilla Terminal blocks, Cable bushing system, kaapelikourut, Identification systems, Protective conductor terminals, Communication processors, Push-in connection system, Electrical and electronic control cabinet components, Relay technology. Sen sijainti on Hövelhof, Saksa.
START

Italia

START, on Valmistaja/ Tuottaja, joka toimii toimialalla Maa- ja metsätalouskoneet ja -laitteet. Se on aktiivinen myös seuraavilla toimialoilla maataloukoneiden osat, mechanical control systems, maatalouskoneiden varaosat, electrical control systems, electronic control systems, marine control systems, light aeronautical control systems. Sen sijainti on Lugo, Italia.