Tulokset hakusanalle

Fibreglass-reinforced plastic - Saksa

10 Yritykset

0 Tuotteet

SOLIDIAN GMBH

Saksa

As a leading specialist, solidian develops and products non-metallic reinforcements made from carbon glass or basalt fibres. The reinforcements are available in bar or mesh form. The fields of application for our reinforcement solutions range from facade panels through bridge construction and maritime construction to restorations. If necessary, solidian supports you at every stage of your projects, from application consulting through the calculation of reinforcements to assistance on the building site. In our in-house test laboratory, we also determine the necessary parameters for you individual building projects. With a team of 270 employees spread across two sites, we develop practical solutions for our customers for the buildings and structures of tomorrow.

Verkkosivusto
STW KAUTZMANN GMBH

Saksa

With its workforce of over 90 people, family company Schwarzwälder Textil-Werke Heinrich Kautzmann GmbH (STW) develops and produces top quality fibres for your industry and applications. As a leading specialist in the production of fibre fillers, shortcut fibres, fibrids & pulp as well as customised solutions, we also process all the fibre materials you need; from natural and synthetic fibres through to high-tech fibres. Thanks to decades of experience, continuous research and a strong customer focus, we are able to stay flexible and react to new requirements with our bespoke fibre solutions. And since we operate in over 70 countries, you will always find a competent fibre expert in your vicinity.

Verkkosivusto
P.J. PRAUSE DUROTEC GMBH

Saksa

In 1974, Paul Joachim Prause founded the company Schichtstofftechnik Prause, which was renamed the P. J. Prause Durotec GmbH in 1998. P. J. Prause had previously, as part of 3M Germany, significantly contributed to shaping the technical application of synthetic leaf springs in Germany with Scotchply™ glass-fibre composites. This enabled Prause Durotec GmbH to acquire more than 35 years of experience in the manufacture and application of leaf springs made from fibre composites. Prause Durotec is a medium-sized company with 16 members of staff and a global customer base. The range of products we manufacture includes all configurations of flat leaf springs with E-glass, S-glass, carbon fibres, with epoxy resin providing the matrix. The procedures used to process the UD prepregs (UD = unidirectional) comply with aeronautical and military standards.

Verkkosivusto
TECHNO-COMPOSITES DOMINE GMBH

Saksa

Do you need special, ready-to-install products made of fibre-reinforced plastics? Then we should get in touch. Creative solutions with fibre composite components/Ready-to-install GRP/CRP/Tailored/Series products and unique items. We are your system supplier for high-quality fibre composite components. Don't try just to replace your steel component with GRP. Make the most of our expertise in [consulting and planning] to develop the right and cost-effective components. Specialists work in-house at our company with a great deal of practical experience in their [designs]. This is how an idea is turned into a system component. [Production] We produce your components. Ready to install. CNC machinery, dust extraction, adhesive bonding experts, quality assurance. We'll do that for you. Simply contact us. DIN 6701-A1 | DIN 2304-S1 | DIN EN ISO 9001: 2015 | IRIS certification | ISO/TS 22163 Founded 1994 | 50 qualified employees | 4800 m² production and warehouse area | CNC machinery

Verkkosivusto
FIBROLUX GMBH

Saksa

Manufacturer of GFK profiles and gratings. Our fibreglass profiles are produced in accordance with EN 13706. Our plastic gratings are made according to DIN 24537-3. Standard profiles are available from stock. Customer-specific profiles created using our in-house machine tools with quick turnarounds. We support our customers with product selection and optimisation from the tender phase onwards. Prototypes with 3D printing technology. Calculating and designing constructions. Advice on replacing conventional materials and constructions with GFRP solutions. Product range: Standard profiles, such as round pipes, square pipes, rectangular pipes, brackets, flat profiles, I profiles, H profiles, Z profiles, hat profiles, C profiles, U profiles, bars, corner profiles, dogbones. Custom profiles to order. Gratings, safety flooring, treads, rebars, reinforcement, threaded rods, nuts, plates, corrugated slabs, square guide way, ladder rungs, sandwich profiles, cable trays, cable ducts, consoles. Flammability properties – DIN4102, UL94V, CEN/TS 45545, NFF16-101, BS 476, EN 13501, DIN 5510.

Verkkosivusto

Sivu yrityksellesi

Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.

Lisää yritykseni

TECHNOFORM KUNSTSTOFFPROFILE GMBH

Saksa

For years, Technoform has been among the world's most acclaimed suppliers in the plastic extrusion industry. The specialist company develops and produces complex extruded profiles for technical industrial applications, especially in the energy, automotive, aviation and construction sectors. Today, some metal components are already being replaced with Technoform products in these sectors. Our customers particularly value TKP's expertise in solution-oriented development with which the company faces each new task. High precision (± 0.05 mm), very smooth surfaces and perfectly sharp outlines, as well as our ability to highly precisely manufacture internally calibrated hollow profiles, expand the range of applications of our products. Our fast processes and exemplary quality of our end products set us apart from the competition.

Verkkosivusto
DIGEL STICKTECH GMBH U. CO KG

Saksa

DIGEL STICKTECH GMBH U. CO KG, on Valmistaja/ Tuottaja, joka toimii toimialalla Optiset kuidut. Se on aktiivinen myös seuraavilla toimialoilla Radiant heaters, Heating elements, Heating foils, heating mat, Carbon-fibre-reinforced plastics (CFRP), Floor heating pads, Electrical heating bands, Electric heat cushions, Electric blankets. Sen sijainti on Pfullingen, Saksa.
REX INDUSTRIE-PRODUKTE. GRAF VON REX GMBH

Saksa

REX INDUSTRIE-PRODUKTE. GRAF VON REX GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Tekniset tekstiilit. Se on aktiivinen myös seuraavilla toimialoilla lasikuitukankaat, lämpösuojakankaat, aramidikankaat, Insulation fabric, Woven glass tape, Fabrics, non-flammable, Yarns for technical textiles, Plastic-coated glass fabric, Polytetrafluoroethylene (PTFE) glass fabric. Sen sijainti on Vellberg, Saksa.
TFP TECHNOLOGY GMBH

Saksa

TFP TECHNOLOGY GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Tekniset tekstiilit. Se on aktiivinen myös seuraavilla toimialoilla Scrims made of technical fibres, Carbon-fibre reinforced plastic semi-finished products, Preforms, textile, Semi-finished products from fibre composites, Carbon-fibre-reinforced plastics (CFRP), Products made from fibre composite materials, Kuitukomposiittimateriaalit, Hiilikuiturakenneosat, Sensors, intelligent. Sen sijainti on Falkenstein, Saksa.
MPI EUROPE GMBH

Saksa

MPI EUROPE GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Kumin ja muovin ruiskupuristus. Se on aktiivinen myös seuraavilla toimialoilla Molded plastic parts, Plastic injection-moulded parts for the automotive industry, Plastic injection-moulded parts for medical technology, Plastic injection-moulded parts for small batches, Plastic injection moulded parts, technical, for vehicle construction, Technical-grade plastic parts, Injection-moulded parts, technical, Plastic moulded parts, reinforced with glass fibre, Plastic components for medical technology. Sen sijainti on Doebeln, Saksa.

Löydä tarjouksia

Suodattimet

Tulokset hakusanalle

Fibreglass-reinforced plastic - Saksa

Tulosten määrä

10 Yritykset