Tulokset hakusanalle

Form on - Valmistaja Tuottaja - Saksa

2 094 Yritykset

6 Tuotteet

A-FORM AG

Saksa

A-FORM AG, on Valmistaja/ Tuottaja, joka toimii toimialalla Ruiskutus, muovin - koneet. Se on aktiivinen myös seuraavilla toimialoilla Muotit, tarkkuus-, ruiskutusmuotit, muovimuottien rakentaminen, valimomuotit, Muotit, tarkkuus-. Sen sijainti on Mildenau, Saksa.
BETON IN FORM GMBH

Saksa

BETON IN FORM GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Raaka-aineet rakentamiseen ja julkisiin töihin. Se on aktiivinen myös seuraavilla toimialoilla Puu, käsittelemätön, Puu - sahattu ja käsitelty, Rakennustyöt, Betonirakenteet, Puu, käsittelemätön, Puu - sahattu ja käsitelty, Rakennustyöt, Betonirakenteet. Sen sijainti on Waghäusel, Saksa.
HOLZ IN FORM GMBH

Saksa

HOLZ IN FORM GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Huonekalut, kodin-. Se on aktiivinen myös seuraavilla toimialoilla Huonekalut ja hyllyt, toimistojen, Tehdaskalusteet, Ikkunat, Ikkunaluukut, Huonekalut ja hyllyt, toimistojen, Tehdaskalusteet, Ikkunat, Ikkunaluukut. Sen sijainti on Neuwied, Saksa.
FORM-GLAS GMBH

Saksa

FORM-GLAS GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Puu, käsittelemätön. Se on aktiivinen myös seuraavilla toimialoilla Puu - sahattu ja käsitelty, Ikkunat, Sisäkatot, Rakennustyöt, Puu - sahattu ja käsitelty, Ikkunat, Sisäkatot, Rakennustyöt. Sen sijainti on Gebesee, Saksa.
SCHÜLKEN FORM GMBH

Saksa

SCHÜLKEN FORM GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Muotit ja mallit. Se on aktiivinen myös seuraavilla toimialoilla Käsityökalut, ei-sähkökäyttöiset, Kannettavat sähkötyökalut, Muovi - teollisuuskoneet ja -laitteet, Kumi ja muovi - työstäminen, Käsityökalut, ei-sähkökäyttöiset, Kannettavat sähkötyökalut, Muovi - teollisuuskoneet ja -laitteet, Kumi ja muovi - työstäminen. Sen sijainti on Waltershausen, Saksa.

Sivu yrityksellesi

Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.

Lisää yritykseni

HOLZ & FORM

Saksa

HOLZ & FORM, on Valmistaja/ Tuottaja, joka toimii toimialalla Huonekalut, kodin-. Se on aktiivinen myös seuraavilla toimialoilla Huonekalut, lasten, Kalusteet, koulu-, Huonekalut ja hyllyt, toimistojen, Tehdaskalusteet, Huonekalut, lasten, Kalusteet, koulu-, Huonekalut ja hyllyt, toimistojen, Tehdaskalusteet. Sen sijainti on Lampertheim, Saksa.
M-FORM GMBH

Saksa

M-FORM GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Kumi ja muovi - työstäminen. Se on aktiivinen myös seuraavilla toimialoilla Kumin ja muovin ruiskupuristus, Kumin ja muovin ruiskupuristus. Sen sijainti on Schloß Holte-Stukenbrock, Saksa.
ATO FORM GMBH

Saksa

ATO FORM GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Farmasia - perus- ja aputuotteet. Se on aktiivinen myös seuraavilla toimialoilla Farmasiatuotteet, Farmasiatuotteet. Sen sijainti on Sailauf, Saksa.
FORM-PACK GMBH

Saksa

FORM-PACK GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Vaahdot, kumi- ja muovi-. Sen sijainti on Altenstadt, Saksa.
SATZ & FORM GMBH

Saksa

SATZ & FORM GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Ladonta, valoladonta ja valopainanta. Sen sijainti on Kassel, Saksa.

TT-FORM GMBH

Saksa

TT-FORM GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Putkityökalusteet ja lisätarvikkeet. Sen sijainti on Raesfeld, Saksa.
GFU MASCHINENBAU GMBH

Saksa

Engineering the Future – Gesellschaft für Umformung und Maschinenbau GmbH. As early as 1989, GFU Maschinenbau GmbH has been developing and implementing tailor-made concepts according to customer requirements. With well-founded expertise, innovative technology and proven quality, different GFU forming processes are combined with each other. GFU offers excellent concepts for hot forming as well as for cold forming. Customers from the automotive industry, aviation, oil and gas exploration, construction industry and other industries trust in solid plants made by GFU.

Verkkosivusto

ECOROLL AG WERKZEUGTECHNIK

Saksa

ECOROLL AG Werkzeugtechnik is a leading provider of tools for fine mechanical surface machining. ECOROLL AG Werkzeuge – which employs around 80 people – develops, manufactures and distributes tools for burnishing, roller burnishing, skiving burnishing and machine hammer preening. ECOROLL tools are used wherever there are special demands for surface roughness or component strength. The burnishing or roller burnishing process is carried out on commonly used machine tools directly after pre-machining and achieves surfaces with very low roughness (< Ra 0.01 / < Rz 1.0 µm), comparable to results when sanding, honing or polishing. This is thanks to the forming of the component edge zone roughness profile without material removal, while also increasing the dynamic strength and edge zone hardness. ECOROLL can also supply a comprehensive range of standard tools from stock. Another of our strengths is developing and manufacturing special solutions according to customer requirements. With our team skilled in distribution, design and applications technology, we create tailor-made tools and processes for special customer applications. Our applications team also offers the opportunity to test our technologies through machining trials at ECOROLL's or the customer's premises and to find any ways of improving the surface finish.

Verkkosivusto
HENKEL MODELLBAU GMBH

Saksa

HENKEL MODELLBAU GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Valimot - kupari-, pronssi- ja messinki-. Se on aktiivinen myös seuraavilla toimialoilla CAD/CAM services and manufacturing, Tool manufacture, CAD/CAM free-form machining, Synthetic casting, Art objects, Complete machining of workpieces, Mineral casting, Refinishing of castings, Precision milled parts. Sen sijainti on Biedenkopf, Saksa.
ZIMMERMANN TECHNISCHE FEDERN GMBH

Saksa

ZIMMERMANN Technische Federn is an expert development and series supplier of springs and assemblies for complex applications. ZIMMERMANN Technische Federn GmbH has its registered office in Leutersdorf, where the borders of three countries meet. The Zimmermanns have over 100 years' experience in developing and manufacturing complex spring systems. Over the years, a strong relationship of trust has been built up between customers, employees and the management. The product range spans from compression, draw and torsion springs to bent wire parts, bent strip parts, complex plate and spiral springs through to diverse assemblies. Nothing's impossible! ZIMMERMANN Technische Federn GmbH has very high expectations of itself and of the quality of its spring systems. Thanks to the excellent training of employees, ZIMMERMANN has developed extensive expertise in its specialist area.

Verkkosivusto
PRESSTECK S.P.A.

Saksa

Pressteck is one of the leading manufacturers of precision deep-drawn parts on multiple die transfer presses, and currently employs more than 100 workers. We manufacture made-to-order parts and assemblies in line with customer specifications. We practise customer service throughout the entire service life of your products. At Pressteck, all processes are optimally organised and certified. From material supply and production right up to needs-based delivery, we ensure prompt provision. Single-use, reusable and special packaging. Specific specialised solutions are possible upon consultation. Pressteck primarily processes stainless steels and non-ferrous metals. The manufactured products are exported worldwide. Pressteck uses metal products that are easily recyclable. The processes follow strict specifications to protect nature and the environment. Leading manufacturers rely on Pressteck. How about you?

Verkkosivusto
FÖRSTER GMBH METALLWARENFABRIK

Saksa

With decades of experience, we have professional expertise with all metals. We use conventional deep-drawing and hydromechanical forming to push deformability to its limits for you. But that's not all: In collaboration with our skilled partners, we offer you a comprehensive range of processing and finishing operations for your products. For any applications, from traditional metal forming to laser welding, contact us. Take advantage of our experience, expertise and creativity, even in the earliest stages of the development of your product. Our facilities: Die-cutter and eccentric presses: 6 to 250 t, deep drawing presses: 25 to 400 t, progressive presses: 100 t.

Verkkosivusto
LASCO UMFORMTECHNIK GMBH

Saksa

LASCO supplies machine tools and production facilities for forming tasks. We develop, design and manufacture individual solutions for industrial users in more than 60 countries worldwide. Profitability, quality and progress are the reasons why LASCO products have become internationally renowned for forming technology and building material production. For more than 150 years, we have been a reliable partner to the forging industry and the metal forming industry. In the early 1990s, we opened up an extremely interesting range of applications with the development of highly efficient machines and sophisticated automation technology for the building materials industry. Our customers' wishes and expectations set the benchmark for our activities. Our well-founded technical expertise and 150 years of experience make it easy for us to find and implement the optimum solution for any individual set of requirements. This applies both for the construction of machines/plants and automation technology as well as for the modernisation of existing facilities.

Verkkosivusto
WALTER SCHNEIDER GMBH

Saksa

Our family-run business was founded in 1954 and has a long tradition in successfully developing and producing extruded parts. Thanks to the use of state-of-the-art technology, we are able to offer cost-effective cold formed parts of premium quality and optimum strength. Our work is distinguished by our high level of production expertise, innovative developments and proactive, close partnerships with mostly long-standing customers. Our customers' trust is based on impeccable quality, reliability and intensive, solution-oriented advice. Customer satisfaction, together with the trust-based cooperation of our highly qualified experts, is the guarantee for the long-term success of our business. We machine aluminium, copper, brass, stainless steel and various steel alloys, as well as pure iron and special materials made from iron-nickel compounds such as Vacodil, Vacon and Permenorm.

Verkkosivusto
H. RICHTER VORRICHTUNGSBAU GMBH

Saksa

H. RICHTER VORRICHTUNGSBAU GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Karapylkät, liikuteltavat. Se on aktiivinen myös seuraavilla toimialoilla Mittauslaitteet ja -välineet, Steady rests for lathes, Hydraulic power tensioning equipment, Power tensioning equipment, Steady rests, self-centring, Welding rotators, Automatic welding machine support, Laiterakennus, Tool measuring equipment. Sen sijainti on Langenhagen, Saksa.

SCHMALE MASCHINENBAU GMBH

Saksa

SCHMALE MASCHINENBAU GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Taivutuskonetyökalut. Se on aktiivinen myös seuraavilla toimialoilla Kuumavalu, Wire bending machines, Pipe bending machines, Strip processing, Door striker, rail clamp, Chain production, jälkipanostuspuristimet, Press lines. Sen sijainti on Altena, Saksa.
FICHTER FORMTEC GMBH

Saksa

FICHTER FORMTEC GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Metallit - koneet ja laitteet. Se on aktiivinen myös seuraavilla toimialoilla Segment former, Roller former, Swaging machine, Separating machine, Crimping, Rolling, Press machine, Roller machine, Pressing. Sen sijainti on Eichstetten, Saksa.
KEBA FASTENINGS

Saksa

KEBA FASTENINGS, on Valmistaja/ Tuottaja, joka toimii toimialalla Kiinnittimet, metallia. Se on aktiivinen myös seuraavilla toimialoilla Kierreleikkaus - terästen ja metallien, Mutterit ja pultit, muoviruuvit, plastic screws, Kierreleikkaus - terästen ja metallien, Thread forming screws, cold formed parts, hot formed parts, fastening parts. Sen sijainti on Stuttgart, Saksa.
FR. KREUTZFELDT GMBH & CO. KG

Saksa

Tucked away in the sprawling beech forests of Schleswig-Holstein lies the municipality of Ascheberg. It is in these delightful surroundings that you'll find our company, which has been producing here for over 150 years. We started out with the bending of steamed beech and ash for the manufacturing of cartwheels and carriages. Today, we are a successful specialist manufacturer of wooden moulded products. Our love of wood as a natural product has remained with us throughout all these years. We rely on a team of selected specialists for our expert knowledge. The distinctive feeling you get when you touch finely processed veneer with your fingertips is what they aim to achieve, and what drives our business forward. Their exact knowledge of how veneer behaves in compression moulding allows solutions to be found for many customer designs. Although are renowned for our good quality of craftsmanship, we also make use of modern computer-assisted processing technology to achieve the perfect results.

Verkkosivusto
EWS WEIGELE GMBH & CO. KG

Saksa

The foundation of EWS dates back to 1960. Our current core competencies are in the area of tool systems for CNC turning machines (static and power-driven tools), expanding to tool turrets and revolver support systems with EWS Korea. The modern profile of the EWS Group is characterised by the individual talents of the more than 300 people that work for the Group. EWS products are "made in Germany". Our specialist expertise is demonstrated by our systems partnerships with DMG-Mori Seiki (Trifix and MSQP), INDEX (W interlocking and V strip), Sandvik (EWS Capto), Iscar and Arno (tool carrier systems). With our EWS Varia quick-change system (modular system, often incorrectly designated as Vario), our company is setting new benchmarks in optimising tool setup times. This system was awarded the Innovation Award from the state of Baden-Württemberg.

Verkkosivusto
SL GLEITLAGERTECHNIK GMBH

Saksa

SL Gleitlagertechnik GmbH concerns itself with the development, construction and distribution of self-lubricating, maintenance-free plain bearings made from metal, metal alloys, sintered metal alloys, plastics and combinations of these materials, as well as providing consultation on these matters. The selection of products offered by the company ranges from conventional plain bearings on a bronze base with lubricating pins to a wide variety of application-dependent lubricant combinations, as well as newly developed products with 99.9% highly pure and chemically neutral graphite to prevent electrolytic corrosion. SL Gleitlagertechnik GmbH delivers worldwide with an export rate of over 60%. Special products include plain bearings made from highly pure nickel with dry lubricant for the chemical industry, which are intended for use in aggressive media and radioactive conditions, and high temperature plain bearings that can be used at temperatures of up to 850 °C under certain operating conditions.

Verkkosivusto
NIRO PRÄZISIONSTECHNIK GMBH

Saksa

With great expertise in craftsmanship, Niro Präzisionstechnik manufactures complex individual parts and assemblies made of thin stainless steel sheets up to 4 mm in thickness. We specialise in the perfect processing of V2A and V4A stainless steel sheets and titanium alloys, aluminium and other high-quality materials. Thanks to our manufacturing conditions, we can also fulfil the standards for products in clean room applications. Our employees have profound material knowledge and extensive technical and crafting experience. We produce precision parts such as funnels, Y-pipes, reductions and transitions (e.g. round to angular) as well as housing according to your drawings, sketches, models or technical requirements. We can process surfaces of any desired structure up to an area of 1000 x 2000 mm. We are a medium-sized family business with decades of experience in sheet metal work. The company is now operated by the third generation.

Verkkosivusto
WBR ROHR- UND BAUELEMENTE GMBH

Saksa

As a technologically leading supplier, we have been the preferred partner of the international construction industry for years. Our longitudinally welded cladding tubes for pre-stressed concrete technology and the rectangular cavity pipes for the pre-cast industry are just two examples of our outstanding manufacturing competence. This is why we are constantly striving to push ahead with new innovations and further developments. Thin-walled, longitudinally welded tubes by the metre or tube cylinders for use in various industrial sectors are an expression of our technological leadership in development and production. We manufacture precisely fitting tubes and components for "rational construction" in the highest product quality, which is a matter of course for us. In addition, we convince with our customer-oriented, competent advice and a flexible, reliable and efficient service. Thus we can also provide you with tailor-made solutions for a wide range of requirements.

Verkkosivusto
BAIER DREHTEILE GMBH & CO. KG

Saksa

CNC turned parts and automatic turned parts made from all machinable materials in accordance with DIN, a drawing or template. Our product range includes everything from simple turned parts to highly complex, ready-to-install components. The parts are used in the automotive, hardware/safety technology, fastening technology and valve sectors as well as the electronics industry. Our machinery creates the optimum preconditions for our customers' wide range of parts. CNC long and short lathes (capacity: 2-65 (175) mm); CNC high-performance milling lathes (capacity: 15-65 mm); Multi-spindle lathes (capacity: 5-35 mm); Single-spindle lathes (capacity: Up to 15/20/26/36/42/65 mm); Our range of services also includes system logistics and finishing of assemblies, e.g. grinding, vibratory grinding, labelling, milling, punching, curing and surface treatments.

Verkkosivusto
PRESSTA EISELE GMBH

Saksa

Pressta Eisele GmbH from Bullay produces circular saws, automatic saws and custom solutions for cross-cutting, drilling, milling and die cutting structural shapes from aluminium and non-ferrous heavy metals. We offer five different model ranges, from automatic saws and thin cutting machines with saw blade widths from 1 mm to high-performance machines with 18.5 kW saw drive. Saw lines are developed on customer demand and can also be integrated into fully automatic processing systems. Semi-automatic circular saws with saw blades of up to 800 mm diameter and up to 13 kW saw drive are also included in the scope of delivery. Further information is available at www.pressta-eisele.de

Verkkosivusto