Tulokset hakusanalle

Screw in - Valmistaja Tuottaja - Saksa

214 Yritykset

0 Tuotteet

GOEBEL GMBH SCHRAUB- UND VERBINDUNGSTECHNIK

Saksa

Goebel is a family-run, internationally active group of companies for fastening and installation technology. We consider ourselves specialists for developing innovative and high-quality fastening elements and the machining system that goes with them. Our friendly and experienced employees, agents and sales partners ensure that our customers are satisfied and actively support the entire procurement and value creation chain. Quality is crucial. This applies to the products and services as well as the technical and organisational development of the company. Goebel wants to be a fair partner to its customers, suppliers and employees. Mutual respect, honesty and friendliness are the foundations of a trusting partnership. We grow as a result of the tasks customers set us.

Verkkosivusto
BTS BEFESTIGUNGSELEMENTE-TECHNIK GMBH

Saksa

BTS Befestigungselemente-Technik GmbH is a medium-sized company in the metalworking industry, focused on the manufacture and sale of fastening and connecting materials. The company was founded in 1983. It is located in Saarburg, in the German state of Rhineland-Palatinate, and employs around 50 members of staff. The product range comprises wing nuts, wing screws, cap nuts, timber connectors, beam clamps, channel nuts, sliding blocks, hammer-head bolts and various specialist parts made to drawings or samples. It is supplemented and expanded continuously. Our company is characterised by a high added-value chain, from metal casting "Made in Germany" to mechanical processing, customer-specific surface treatment and individual packaging. We act based on our customers' requirements, in a flexible and quality-conscious manner and through certified management systems.

Verkkosivusto
LEDERER GMBH

Saksa

Lederer has been one of the leading providers of stainless steel connection elements for over 50 years and offers more than 60, 000 different articles directly off the shelf: - Screws, bolts, nuts, rings, washers, etc. - Made of stainless steel, steel and non-ferrous materials - Standard parts - DIN, EN, ISO and in-house standards - Articles and special materials according to drawings. At the same time, more and more customers are relying on process-optimised procurement via C-parts management from Lederer. Benefit from the following advantages yourself: - Up to 50% process cost reduction - Permanent availability and guaranteed quality - Reduced capital commitment thanks to inventory reduction - Individual logistics, e.g. Kanban, consignments, and more. Lederer is large enough to implement comprehensive, detailed projects – we would be happy to provide examples of previous projects if requested – and, at the same time, small enough to be able to react quickly, flexibly and unbureaucratically to the demands of the market and our customers.

Verkkosivusto
BLIS KUGELGEWINDETRIEBE GMBH

Saksa

The range of services and supply of BLIS Kugelgewindetriebe GmbH includes: Ball screws in whirled and ground versions, according to DIN and customer drawing with standard or special nuts, trapezoidal spindles in rolled and whirled versions, linear guides, accessory parts like bearings and bearing blocks, repairs and checks of ball screws.

Verkkosivusto
PITZL METALLBAU GMBH & CO. KG

Saksa

Pitzl has over 30 years' experience as a leading supplier of wood connecting systems. "The right concept for every application" is Pitzl's motto. We are synonymous with flexibility. In addition to our broad range of post bases, connectors, tools, soundproofing solutions and many more products, we offer custom-designed products based on customers' individual needs and specifications. This enables us to ensure that each processor receives the optimal solution proposal for effective wood connection, even with complex requirements. One of only a handful of manufacturers, Pitzl produces post bases, connectors and balcony pillars with extensive ETA approval and the associated legally required CE mark. It goes without saying that "Made in Germany" stands for the highest quality. This means we can guarantee processors maximum product safety and minimise risks for traders.

Verkkosivusto

Sivu yrityksellesi

Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.

Lisää yritykseni

WILH. KÄMPER GMBH U. CO KG

Saksa

Wilh. Kämper is a family company specialising in wire forming technology, and has been manufacturing its products at its site in Lüdenscheid, Germany, since 1888. Wilh. Kämper is your technical problem solver. We offer technical solutions in the wire sector from development and prototype production to small batch and series production. Our technology includes: – Three-plane bending – Embossing – Chamfering – Knurling – Thread rolling – Reducing – Thread cutting – Welding – Butting – Punching – Flattening – Upsetting We process all formable materials, including steel wire, spring wire, stainless steel wire, non-ferrous metal wire, in diameters from 1.5 mm to 10 mm, and can produce any surface to order

Verkkosivusto
STEINSTOSSER & SCHMACHTENBERG GMBH & CO. KG

Saksa

Steinstosser & Schmachtenberg are part of the BUCHHOLZ GROUP – welcome! A heavyweight specialist in the industry, with over 100 years of experience and a certified quality management system as an optimum criterion: We are known the world over for the consistently outstanding quality of our products. Our employees are the basis for our success: They have in-depth knowledge of machines, applications and their special challenges – and will advise you personally, objectively and quickly. Excellent service, on which you can rely. One of our strengths is reliable delivery of complete knife sets, including accessories. This is how our clients profit from short fitting times and a high degree of certainty when planning. Visit our online shop at https: //shop.buchholz-gruppe.eu to find the right knives for your machine. We supply knives and wear parts for the following sectors: Recycling, road construction, sheet metal working, forestry, steelworks

Verkkosivusto
WILHELM LÜSEBRINK GMBH

Saksa

Our company has been one of the largest producers of wire goods in Europe for decades. In 1852, Wilhelm Lüsebrink, the village blacksmith, first produced eyebolts with wood thread in the German district of Öckinghausen, Halver – a product that is still one of the most important in our range today. In a good mixture of tradition and modernity, we now produce and supply markets all over the world from two sites. Modern production methods and logistics, complete adherence to quality and deadlines and the ability to react flexibly to special customer requirements are the decisive competitive advantages and the guarantee for our company's success, now in its sixth generation. LÜSEBRINK – we can fix it.

Verkkosivusto
LK ZERSPANUNGSTECHNIK GMBH

Saksa

We are a company in the field of CNC machining, specialising in the production of screws, connecting elements and made-to-order parts. Our company is based in Trier, near the Luxembourg border. The materials that we use for manufacturing include stainless steels, chrome-nickel steels and super duplex such as 1.4410 or 1.4501, as well as high-temperature nickel-based alloys such as Inconel 2.4856 or Nimonic 2.4952. We boast over ten years of experience, and we manufacture products on two new CNC-controlled machines as well as numerous others. We'd be glad to direct you to our homepage: www.lk-zerspanungstechnik.de. You can find further information about us here. We have also attached our digital flyer for you. Since 7th June 2023, we have been approved in line with AD2000 W0. We successfully achieved ISO 9001 certification on 20th June. We really look forward to hearing back from you, and we hope you'll allow us to be your supplier and manufacture products for you.

Verkkosivusto
HEICO BEFESTIGUNGSTECHNIK GMBH

Saksa

HEICO BEFESTIGUNGSTECHNIK GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Ruuvit. Sen sijainti on Ense-Höingen, Saksa.

ABU-VERBINDUNGSELEMENTE GMBH

Saksa

ABU-VERBINDUNGSELEMENTE GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Ruuvit. Sen sijainti on Lüdenscheid, Saksa.
ROBERT FRIEDRICHS GMBH

Saksa

ROBERT FRIEDRICHS GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Ruuvit. Sen sijainti on Wuppertal, Saksa.

ERNST THOMAS GMBH

Saksa

ERNST THOMAS GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Kiinnityslaitteet. Se on aktiivinen myös seuraavilla toimialoilla Ankkuripultit ja ankkurit, Tangot, kierre-, Mutterit pulteille, Ruuvit, Ankkuripultit ja ankkurit, Tangot, kierre-, Mutterit pulteille, Ruuvit, Hammerhead bolts. Sen sijainti on Hemer, Saksa.
BULLFIX GMBH

Saksa

BULLFIX GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Ruuvit. Sen sijainti on Plettenberg, Saksa.
NORMTEILWERK ROBERT BLOHM GMBH

Saksa

NORMTEILWERK ROBERT BLOHM GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Ruuvit. Se on aktiivinen myös seuraavilla toimialoilla Drill bushings, Cylinder sleeves, Headed drill bushes, Plug-in drill bushes, Clamping bushes, Flat head screws, Custom solutions, Turning, sorvatut terästavarat. Sen sijainti on Büchen, Saksa.
ALBERT PASVAHL (GMBH & CO.)

Saksa

ALBERT PASVAHL (GMBH & CO.), on Valmistaja/ Tuottaja, joka toimii toimialalla Ruuvit. Se on aktiivinen myös seuraavilla toimialoilla Set screws, Eye bolts, Automaattien sorvausosat, Special screws for mining, Triangular nuts, ristiruuvit, Flat head screws, wing nuts, Siipiruuvit. Sen sijainti on Hamburg, Saksa.
FRIEDR. TRURNIT GMBH

Saksa

FRIEDR. TRURNIT GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Ruuvit. Se on aktiivinen myös seuraavilla toimialoilla Aluminium nails, Anchor nails, Fastening technology, Clout nails, Insulation fastenings for roofs and walls, Double-headed nails, Wire nails, Copper nails, Lightweight board nails. Sen sijainti on Altena, Saksa.
MAX MOTHES GMBH

Saksa

MAX MOTHES GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Ruuvit. Se on aktiivinen myös seuraavilla toimialoilla Steel turned parts, Fastening tools, Metal compound technology, Metal products, industrial, Screws, heavy, Screws, oversized, Special parts, tailor-made, Connection technology (automotive industry), DIN and standard parts. Sen sijainti on Neuss, Saksa.
FRIEDRICH SCHULTZE GMBH

Saksa

Schultze RiRo is a reliable partner in nearly all imaginable applications – we stand out thanks to the extraordinary stability and simple connection of their products. Our finned tube heaters protect your delicate systems against frost. Dirt, moisture or water jets and temporary flooding are not a problem for Schultze RiRos because these trade and industrial heaters fulfil all the criteria of protection class IP 66/67.

Verkkosivusto
LUTZ PUMPEN GMBH

Saksa

Since the company was founded in 1954 by Karl Lutz and the creation of almost ideal production facilities in Wertheim, this brand has become synonymous with complete systems for the transfer and filling of liquids in recent years. Today, the Lutz Group is made up of highly efficient medium-sized companies, operating in various industries in Germany and abroad. The fusion of selected enterprises made it possible to considerably expand the product range. Today, the Lutz Group of companies employs more than 350 people worldwide.

Verkkosivusto

MBK VERPACKUNGEN GMBH

Saksa

Our sphere of activity has always been plastic packaging for the cosmetics and pharmaceutical industries. Customers who come to us needing a tube, drum or bottle made of plastic are in the right place. We are an owner-managed traditional company and have been operating in the market for over 40 years. Highly qualified and dedicated employees are the cornerstone for ensuring we provide our customers with optimum support. We identify requirements, offer customers solutions to their problems and implement these solutions in a short time period. Service, quality and performance are, and will always remain, our basic principles. Thanks to innovative, project-related processing, supported by a modern ERP system, we can always respond to current changes and advise our customers accordingly. In addition to the extensive range of different, individual tubes, bottles, cans and jars as well as sachets and refill packs, we recently started offering high-quality thermoformed parts for a wide variety of applications.

Verkkosivusto
BILSTEIN & SIEKERMANN GMBH + CO. KG

Saksa

Competent, efficient and trustworthy. We have been a trusted partner of the automotive and supplier industries since 1956, producing customer-specific locking screws, turned and cold extruded parts that comply to standards. We are a leading supplier in the locking screw industry. From the very beginning, the satisfaction of our global customers has been our top priority. For this reason, we implement the most technologically and economically effective solution for every order and adjust our offer continuously to the requirements of the market. Whether it is automotive, machinery and plant engineering or services, we have the right solution for your industry

Verkkosivusto
BÄCKER GMBH & CO. KG

Saksa

Bäcker has been a manufacturer and supplier of technical standard parts and control elements made of plastic and metal, as well as individual solutions made of plastic for industry, for more than 40 years. The wide product range of more than 5000 items with a total of 23, 000 different variants and dimensions of standard products from the three series PlacoGrip®, PlacoTec® and PlacoCap®. Overview of our product series. PlacoGrip® – control elements (knobs, levers, hinges, etc.). PlacoTec® – standard elements (DIN screws, nuts, washers made of plastic, etc.). PlacoCap® – protective elements (caps, plugs, sanitary fastenings, etc.) We manufacture products for leading industrial companies from a variety of sectors: Electrical engineering electronics, medical technology, machinery and systems engineering, the automotive industry, the chemical industry, shipbuilding, the leisure and sports equipment industry, the sanitary industry and rehabilitation equipment.

Verkkosivusto
BECHTEL GMBH

Saksa

Bechtel from Wuppertal is a supplier of spare parts and components for the bulk handling industry. We are your contact for parts in: elevators, chain conveyors, screw conveyor. We supply from our extensive stock conveyor chains, drop forged chains, sprockets, elevator belting, elevator buckets and much more with short delivery times. We also offer our customers quick delivery times for special solutions such as special materials or special designs. We have the possibility to design millimeter-precision special designs by means of 3D-supported software and present them accordingly to the customer. We draw on a great experience and offer our customers practical solutions for every need. Together with the customer, we work out solutions for elevators, chain conveyors and screw conveyors.

Verkkosivusto
JÄGER & FRESE GMBH

Saksa

Manufacturing and distribution of connecting elements with a 3600 square metre production and warehouse area. Our customers include the furniture industry, the woodworking industry and staircase manufacturers, machine and apparatus production, shopfitters and shelving manufacturers, heating manufacturers and the sanitary sector. Our special services: High supply capacity and on-time delivery and arrangement, packaging and assembly of small iron and plastic parts. Our speciality is manufacturing height-adjustable screws and furniture gliders made of steel, stainless steel and plastic. Our product range covers dimensions of M 8x10 mm to M 24x300 mm, with all common surfaces. We are happy to help with new technical developments and problems – we will work together with you to find a solution.

Verkkosivusto
RIXIUS AG

Saksa

Rixius AG is one of the leading manufacturers and retailers of glass packaging, plastic and tin plate in Germany. We supply glass bottles, plastic bottles, cans and much more. Our product portfolio of bottles, cans and buckets is rounded off with a range of suitable accessories that includes lids, caps, industrial sprayers, pumps, dispensers, etc. Our bottles and cans can be printed and labelled in house according to individual requirements. As a manufacturer and distribution partner, as well as due to the large scope of the market, we can manufacture products of optimum quality and price for our customers.

Verkkosivusto
OTTO EICHHOFF GMBH & CO. KG

Saksa

OTTO EICHHOFF GMBH & CO. KG, on Multi-Category, joka toimii toimialalla Mutterit ja pultit. Se on aktiivinen myös seuraavilla toimialoilla sorvatut terästavarat, rivets, Cold formed parts, muoviruuvit, Threaded bushes, karat, Spacing sleeves, Self-clinching studs, Screws made to order. Sen sijainti on Lüdenscheid, Saksa.
TOX-DÜBEL-TECHNIK GMBH

Saksa

TOX-DÜBEL-TECHNIK GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Kiinnityslaitteet. Se on aktiivinen myös seuraavilla toimialoilla Tapit, All-purpose dowels, Universal dowels, Expansion dowels, Aerated concrete dowels, Bolt anchors, betoniruuvit, ruuvit, Composite mortar. Sen sijainti on Krauchenwies, Saksa.
AP ARMATUREN PROKSCH GMBH

Saksa

AP ARMATUREN PROKSCH GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Putkityöt, teollisuus. Se on aktiivinen myös seuraavilla toimialoilla Sisäkumit, Stainless steel valves, Stainless steel fittings, Special screw connections, kuulaventtiilit, Putkikierreliittimet, Stainless Steel Tube Fittings, Compression ring pipe unions, Screw connections. Sen sijainti on Schwaikheim, Saksa.
KOLB KS FASTENERS GMBH

Saksa

KOLB KS FASTENERS GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Aluslaatat. Se on aktiivinen myös seuraavilla toimialoilla Trapezoidal threaded rods, Screws, rust- and acid-resistant, Threaded pins, Screws made of special-purpose steels, Hexagon screws, Hexagonal nuts, Fine thread screws with hex socket, Countersunk head screws, Hexagonal nuts made of brass. Sen sijainti on Wuppertal, Saksa.