Tulokset hakusanalle

Supply - Valmistaja Tuottaja - Saksa

5 162 Yritykset

19 Tuotteet

ANTARES LIFE CYCLE SOLUTIONS GMBH

Saksa

ANTARES LIFE CYCLE SOLUTIONS GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Rakennuskoneet. Se on aktiivinen myös seuraavilla toimialoilla varaosat, Obsolescence, small production runs, Small quantities, Small volumes, Supplier consolidation, One-stop shop, Engineering, käänteinen tekniikka. Sen sijainti on Mannheim, Saksa.
CONDUCTIX-WAMPFLER GMBH

Saksa

The core activity of Conductix-Wampfler is the development, production, installation and servicing of systems providing a tailor-made solution for power and data transmission to mobile equipment and machinery. In addition to its undisputed industry expertise, the company is characterised by its technical competence and innovative strength: All energy and data transmission technologies in common use today, such as cable trolley systems, conductor rails, spring cable reels, motorised cable reels, slip ring elements, through contactless energy supplies, battery charging solutions and battery management systems to safety radio remote controls and mobile controls are brought together under one roof. For customers, this means product-neutral advice and optimum technical implementation of numerous applications in the fields of industry, event technology and passenger transport, all from a single source.

Verkkosivusto
WILOFA DIAMANT WILLI LOHMANN GMBH & CO. KG

Saksa

WILOFA DIAMANT Willi Lohmann GmbH & Co. KG has been your partner for sapphire and diamond coatings for over 50 years. Our diverse range of products includes the following areas: Special coatings/diamond coatings for industrial applications (e.g. in mechanical engineering, manicures and pedicures, ceramics and glass processing, plastics processing, medical technology, the jewellery industry and the printing industry). We offer solutions for a wide range of challenges in the areas of gripping, holding, grinding, setting, removing material, rounding off bristles, pipe clamping, etc. We produce diamond-coated dental instruments (FG diamond instruments, HP laboratory instruments, diamond discs, etc.) and sapphire nail files. Our sapphire nail files are made of spring steel and coated with sapphires of different grain sizes.

Verkkosivusto
SBA-TRAFOTECH GMBH

Saksa

Our family business is one of the top ten manufacturers of winding goods in Germany. There are many different reasons for this. Yet the foundation of our company philosophy, professionalism, quality, flexibility, creativity and reliability, plays a decisive role. Another reason is the way our employees think and act entirely with the customer in mind. These factors are the best guarantors for long-term relationships with satisfied customers. We see ourselves as partners of the industry, and besides providing transformers and electricity distribution "off the shelf", we are particularly good at developing and quickly realising custom solutions for almost any requirement. We synchronise our client's ideas and requirements with our technical expertise and then make the most of every product, bearing technology and budget in mind. We clearly profess our dedication to our location in Germany – SBA is and will remain "made in Germany".

Verkkosivusto
MURRPLASTIK SYSTEMTECHNIK GMBH

Saksa

MURRPLASTIK SYSTEMTECHNIK GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Eristysaineella täytetyt taipuisat johdot. Se on aktiivinen myös seuraavilla toimialoilla Kaapelivaipat, Energy chains, Energy supply system, Cable entry system, identification, Cable protection, Energy supply chains, Energy supply chains, pre-assembled, Stickers for labelling cables and leads. Sen sijainti on Oppenweiler, Saksa.

Sivu yrityksellesi

Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.

Lisää yritykseni

HANS TURCK GMBH & CO. KG

Saksa

Turck is one of the leading groups worldwide in the industrial automation sector. With more than 4200 employees across 28 national subsidiaries and distribution partners in a further 60 countries, we are always in a position to provide local support to our customers, anywhere in the world. As a specialist in sensor, field bus, connection, interface and RFID (Radio Frequency Identification) technology, we offer efficient solutions for factory and process automation. Our data and communications solutions make us one of the pioneers of Industry 4.0. With cutting-edge production sites in Germany, Switzerland, the USA, Mexico and China, our family-owned company is able to meet the demands of local markets quickly and flexibly at any time. The markets: Whether in the mechanical and plant engineering, automotive, transport and handling, mobile equipment or food and packaging industry, Turck automation solutions and products increase the availability of your systems.

Verkkosivusto
CIC - KLAUS CZERWONKA

Saksa

As a customer-oriented service provider and supplier, we offer a comprehensive and efficient range of services. In our business segments, we serve as an interface between market requirements and the possibilities offered by modern manufacturing processes. Through consulting, mediation, trade or in-house production – our aim is to provide you with the optimum solution for your individual tasks. In doing so, we build on essential values such as partnership, fairness, openness and honesty, diligence and safety, environmental protection and the careful use of resources. We are also fully aware of our social responsibility and are committed – in particular at a local level – to art, culture and the community. Be inspired by our wide range of pneumatic cylinders – double-acting, single-acting and standard cylinders. Our product portfolio also includes telescopic cylinders and rodless linear cylinders. Do you need special solutions? We also have electromagnetic cylinders, telescopic pneumatic cylinders and cylinders with anti-rotation lock. Whether you are looking for working cylinders, boring cylinders, stainless steel special cylinders or pneumatic tandem cylinders, we're sure to have the solution for you. In the automotive, mechanical engineering and medical technology industries, we accompany you through professional project management. We call on all our expertise and experience to support launch management, quality assurance and supply chain management.

Verkkosivusto
IREMA-FILTER GMBH

Saksa

IREMA-Filter – A global supplier of filter media. IREMA produces synthetic filter solutions for the automotive, air conditioning and ventilation, and medical sectors, and for other filtration applications. In addition to its synthetic filter media, IREMA also offers MiniPleat products and complete filters (3 V cells, hybrid filters) – tested to ISO 16890, EN 779 or Ashrae 52.2. We have the in-house capability to design, develop and construct our machines and manufacturing technologies. Our comprehensive expertise allows us to create customer-specific filtration solutions and also meet the exacting standards of the filter industry. Our most recent developments: an electrostatic medium with excellent filtration efficiency and very low pressure drop as a replacement for tribo media, a unique synthetic HEPA material with particle separation of up to 99.99%, and a new ePM1 filter material with excellent pressure drop = using 30% less energy with a 70% increase in the dust retention capacity. Our products are an asset to your company!

Verkkosivusto
DYNATECT EUROPE GMBH

Saksa

Dynatect-MFB is one of the leading providers of equipment protection and offers a comprehensive range of industrial equipment protection products with custom solutions for all sectors. The parent company DYNATECT Manufacturing Inc. (formerly A&A Manufacturing Co. Inc.) is the leading manufacturer of dynamic equipment protection in North America, with headquarters in New Berlin, Wisconsin. Gerald O'Rourke, founder of today's DYNATECT Group, initially manufactured bellows covers and various products made of plastic-coated fabrics for the machine and tool industry in the initial phase of the company in 1945. Today, with five production sites and around 500 employees, DYNATECT is a growing global company and the first point of contact for effective protective systems in the following markets: Machine tools and automation, medical engineering, transport/traffic engineering, maintenance, building and construction/agriculture, as well as oil and gas.

Verkkosivusto
SCHNEIDER & GEMSA GMBH

Saksa

Schneider & Gemsa offers dedicated and professional solutions for customers from the automotive, industrial, telecommunications, traffic management, medical and electronic equipment sectors. Our manufacturing capabilities range from one-off and assembly-based manufacture to the complete manufacture of terminal devices and complete system solutions. We move and operate complete "business areas" – fully and semi-automatic production lines in affordable locations. Our sites in Germany, Czechia and Moldova enable us to offer cost-optimised solutions and services. Schneider & Gemsa has many decades of expertise in cable assembly, mechanics, mechatronics, electronic equipment, sensors and actuators. Since the company's foundation, we have produced several million electric adjusting motors, mechanical and electrotechnical assemblies and end devices. Our cable assembly produces strands as well as data, sensor and control cables, wiring harnesses and control cabinets with innovative technologies using the latest machinery and tools. Our own equipment workshop manufactures individual assembly, manufacture and inspection equipment. We consider quality, environmental protection and the conservation of resources to be essential aspects of our activities. Our company complies with the standards DIN EN ISO 9001: 2015, IATF 16949: 2016 (automotive) and DIN EN ISO 14001: 2009 (environment) at all sites.

Verkkosivusto

VOGELSANG GMBH & CO. KG

Saksa

We are guided by your requirements Understanding customer wishes, initiative, introducing ideas into continuous research and development – these principles guided our company founder 90 years ago, and they still guide us today. This is why many of our company's products are considered to be leading solutions worldwide in the areas of pump, grinder, distribution and biogas technology, and have been used to great success in countless industries. One thing is clear: Standing still is not part of our philosophy. We continuously work to optimise our products and constantly adapt them to the needs of our customers and markets – to make your work a success. Vogelsang offers technologically outstanding products and excellent service in 25 countries worldwide.

Verkkosivusto
PITZL METALLBAU GMBH & CO. KG

Saksa

Pitzl has over 30 years' experience as a leading supplier of wood connecting systems. "The right concept for every application" is Pitzl's motto. We are synonymous with flexibility. In addition to our broad range of post bases, connectors, tools, soundproofing solutions and many more products, we offer custom-designed products based on customers' individual needs and specifications. This enables us to ensure that each processor receives the optimal solution proposal for effective wood connection, even with complex requirements. One of only a handful of manufacturers, Pitzl produces post bases, connectors and balcony pillars with extensive ETA approval and the associated legally required CE mark. It goes without saying that "Made in Germany" stands for the highest quality. This means we can guarantee processors maximum product safety and minimise risks for traders.

Verkkosivusto

FLÜGEL CSS GMBH & CO. KG

Saksa

Flügel CSS is one of the leading manufacturers of sharpening steels worldwide. Our customers are the top brands for cutlery and household products and distributors/wholesalers for professionals. We offer a wide range of sharpening steels, knife sharpeners and cutlery services for household and professional use. This includes traditional sharpening steels, knife sharpeners, diamond/ceramic coated steels and special products for outdoor/leisure purpose. Our service includes the production of knife and scissors blanks, as well as special stamped blades and similar products for professional use, like agricultural, paper industry, etc. Modern automatic punching machines and free-cutting presses offer high flexibility and productivity. The protective gas hardening shop specialises in the individual heat treatment of cutlery, as well as being a contract service provider for many other industrial sectors such as mechanical engineering, medical technology, etc.

Verkkosivusto
PACO PAUL GMBH & CO. KG METALLGEWEBE UND FILTERFABRIKEN

Saksa

The manufacture of wire mesh is based on traditional craftsmanship. Making high-tech products from wire mesh requires state-of-the-art production and finishing equipment too, like that used at PACO. This is created in PACO's in-house Development and Mechanical Engineering departments. This means that PACO quality cannot easily be copied by others with little expertise – with all the advantages for manufacturing in Germany. As a wire mesh specialist, PACO boasts exceptional in-house expertise, particularly in screening technology. Plus they have comprehensive knowledge of and in-depth awareness of specific processes in screening applications for a wide variety of industries, as well as in research, laboratory and development environments. PACO wire meshes for silk-screen printing are some of the world's best in their numerous areas of application.

Verkkosivusto
ENVASES ÖHRINGEN GMBH

Saksa

As of recently, the HUBER Packaging Group belongs to the world-renowned Envases Group, and is therefore part of Envases Europe A/S with headquarters in Denmark. As part of the Envases Group, we strengthened our affiliation with a change in name and logo, thereby appearing with the unified identity of the Group. On 1st April 2021, we changed the name of all previous HUBER Packaging companies to "Envases". The company produces tinplate packaging for paints and lacquers, chemical products and food products. In the area of BEVERAGE, Envases Öhringen specialises in production of five-litre party barrels from tinplate and is the global market leader in this market sector. Envases is also the leading supplier in hazardous materials packaging for the transport of dangerous goods. Furthermore, blown plastic packaging is produced at the site in Aesch, Switzerland. The online shop is only available within Germany.

Verkkosivusto
BEKO TECHNOLOGIES GMBH

Saksa

With an extensive program BEKO TECHNOLOGIES stands for compressed air technology "at its best". For more than three decades, BEKO TECHNOLOGIES has developed, manufactured and sold high-quality, reliable and efficient components and systems for compressed air processing and condensate technology. Now, BEKO TECHNOLOGIES offers a complete program for all tasks related to the processing of compressed air. Expert advice and a qualified service are a trademark of the independent and family-owned company.

Verkkosivusto
CLIMAIR PLAVA KUNSTSTOFFE GMBH

Saksa

ClimAir rain and wind deflectors are fitted to the side doors of vehicles and impress with their subtle elegance. They improve the air quality inside the vehicle and enable the driver and passengers to enjoy a circulation of fresh air, even while it is raining or snowing. During periods of intense sunlight, they prevent uncomfortable heat build-ups inside the vehicle when the windows are opened to only slightly above the lower edge of the wind deflector. ClimAir rain and wind deflectors are fitted to the side doors of vehicles and impress with their subtle elegance. They improve the air quality inside the vehicle and enable the driver and passengers to enjoy a circulation of fresh air, even while it is raining or snowing. During periods of intense sunlight, they prevent uncomfortable heat build-ups inside the vehicle when the windows are opened to only slightly above the lower edge of the wind deflector.

Verkkosivusto
BÜRKLE GMBH

Saksa

Bürkle develops, produces and markets sampling devices, sampling systems and accessories, filling devices, drum pumps and container pumps for aggressive and hazardous fluids such as acids, alkalis and solvents as well as many kinds of laboratory apparatus and equipment, mostly made from plastic. More than 2000 products are sold by our trading partners across the world. Bürkle's customers are mostly active in industrial fields including chemical engineering, pharmaceuticals, food and luxury items as well as environmental conservation. Bürkle offers the widest range of manual sampling equipment and filling devices in Europe. Bürkle products are manufactured exclusively in Germany. Problem solutions and niche products are our specialism and the secret to Bürkle's success. Many products were developed from a practice-oriented perspective in collaboration with chemical and pharmaceutical companies. Bürkle has been certified in accordance with DIN/EN ISO 9001 since 1994.

Verkkosivusto
CARL HÜBENTHAL GMBH & CO. KG

Saksa

WE OFFER YOU COST-EFFECTIVE WIPE SOLUTIONS SPECIFICALLY GEARED TOWARDS THE DEMANDS OF THE RESPECTIVE WORK PROCESS AND ENVIRONMENT. WE COVER THE FOLLOWING AREAS OF APPLICATION: WIPES FOR CLEANING, CARE AND DISINFECTION Additional factors such as user-friendliness and low-cost disposal are major factors which we consistently incorporate within our product-development activities. With our wipe solutions, your employees can perform their cleaning and wiping tasks faster and more efficiently, and therefore more cost-effectively. With our expertise, we operate in 18 European countries and the USA, serving as a point of contact to businesses working in the following sectors: Industry, Food & Beverage, Precision Mechanics and Optics, Automotive, Varnishes/Paints and Printing, Pharmaceuticals and Chemicals, Construction, Healthcare, Cleaning and Services. Our customers and partners rely on the powerful performance of our products, our speedy delivery times and our expert consulting service which always focuses on finding the best possible solution for our customers. We have been doing this for over 80 years, with quality Made in Germany.

Verkkosivusto
SCHÖPP-SPORTBODEN GMBH

Saksa

Schöpp-Sportboden GmbH is known for the production, supply and laying/installation of tennis floors, mobile and permanent badminton courts, artificial grass for agility sports, as well as ball stopping curtains and granulates. Over the years, we have claimed an excellent reputation for ourselves as an innovative manufacturer and supplier of tennis floor coverings in all matters concerning indoor tennis court refurbishment. In addition to our many years of experience, our company group is particularly characterised by our flexibility, high quality-awareness and innovative product development. In contrast to other manufacturers of tennis coverings, we choose to sell directly to hall owners, thus providing everything – from development right up to the installed covering – FROM A SINGLE SOURCE.

Verkkosivusto Näytä kaikki tuotteet

AS SCHWEISSTECHNIK GMBH ARNHOLD

Saksa

AS-Schweißtechnik GmbH is a family-run company with 15 employees. Ever since 1980, we have been producing stud welding units, accessories, stud welding machinery and welding studs from our 900 m² site. 1980: Company established by Hans-Joachim Arnhold. 1980-1990: Developing new equipment technology and expanding business areas. 1990: Construction of the current main building for administration, equipment production and stud storage. 1998: Expansion of the new building to include storage and production facility for special equipment. 2000: Into the second generation as Martin Arnhold joins the company. 2008: Introduction of the ISO 9001 quality standard. December 2013: Company founder Hans-Joachim Arnhold hands the company over to his son, Martin, and begins his well earned retirement. We operate in more than 50 countries around the world.

Verkkosivusto
ALSA-CHEMIE OBERFLÄCHENTECHNIK

Saksa

Since 1968, our company has been active in the chemical detergents doe commercial and industrial application sector, led by two generations of our family. In 2001, we were certified according to DIN EN ISO 9001 and DIN EN 14001 (quality and environmental management). We consider ourselves a problem solver for a range of cleaning tasks and applications, supplying industrial businesses of all kinds across a number of handicraft sectors, alongside the automotive industry and its suppliers. We specialise in environmentally friendly cleaning systems, in particular ultrasonic cleaning devices using water. Our product range has grown to include over 80 different detergents for ultrasonic cleaning, immersion cleaning, spray cleaning, mist cleaning, manual cleaning and barrel finishing. Our supply range also includes special products such as rust-prevention products, solvents, defoamers, etc. We also supply suitable manufacturers of high-quality cleaning devices, upon request.

Verkkosivusto
BERGMANN & HILLEBRAND GMBH & CO KG

Saksa

In addition to manufacturing precision sheet metals, Bergmann & Hillebrand provides services to process these into stamped, drawn and bent parts. The company specialises in perforated plates with small hole widths, high openings and high demands on optical and functional quality. Whether it concerns demanding functional components for technical applications, high-end multimedia applications, tailor-made moulded parts for design-oriented products or prototypes, special editions or small batch production, we always meet our customers' expectations and often even manage to surpass them. Contact us. We will personally take care of your issue and find the ideal solution for your product as well. The successful tradition that spans three generations of Bergmann & Hillebrand has continually resulted in quality, innovation and progress. Today, this tradition is embodied by the owning family, the board of directors and a confident workforce of around 40 employees, who are as highly trained as they are highly motivated..

Verkkosivusto
SCHMID & WEZEL GMBH, WERK HILSBACH

Saksa

Development, design, manufacture and distribution of flexible shafts for: Mechanical engineering, aeroplane technology, medical technology, horticulture, automotive manufacture. Delivery exclusively of customer-specific products from individual parts to large-scale series. BIAX Flexwellen is your brand for high-performance flexible shafts for various application ranges. Custom designed and precisely manufactured in accordance with high quality standards – you will receive a durable solution exactly tailored to your requirements from us. On the basis of more than 90 years of experience, we additionally use various BIAX variants which make it possible to implement virtually any customer requirement at short notice. Benefit from pre-assembled complete solutions in which the shaft cores are already assembled with shaft couplings, protective hoses and hose couplings.

Verkkosivusto
AQUACHEM GMBH SEPARATIONSTECHNIK

Saksa

Filter presses are our specialty! Whether conventional chamber filter presses, accessories or fully automatic membrane filter presses. With almost 30 years of experience in filtration, AQUACHEM offers an efficient and optimal solution for many applications. We are particularly proud of our AF filter machines. The fully automatic press is a mature and reliable system that has already proven itself many times under the toughest conditions. Compared to our competitors in the market, the difference we offer lies in myriad details and, primarily, in the definition of 'fully automatic operation'. The AF filter machine continuously produces and empties filter cakes without the presence of an operator. It is guaranteed that no medium can escape in an uncontrolled manner. On the other hand, our BC series for semi-automatic applications impresses with its simplicity and at the same time maximum convenience for the operator. Small manual filter presses up to format 630 are covered by the EC series. The LCM 320 (Pocket Press Membrane), however, can be used mobile on a practical trolley, ideally on site. This machine can also be used as a test filter press in a case to make a suitable choice of cloth or to check the filterability of the suspension. Fully equipped, this compact press can manually implement functions that our fully automatic machines can also do. Convince yourself and contact us!

Verkkosivusto
FRIDOLIN MÜLLER

Saksa

Production of deburring brushes, cylindrical brushes, tube brushes, technical brushes, wire brushes, nylon brushes, twisted brushes, brushes for washing systems, truck wash brushes, car wash brushes. The Fridolin Müller company was founded in 1952 under the name of Tierhaarverwertung Fridolin Müller. It worked with cattle hair, some of which came from German cattle. Most of it, however, was imported from America. These hairs were processed in four working operations to create the so-called "bakers' bundles". The working operations included: Loosening the hairs using a so-called "hair-wolf", heckling them (which means combing them into one direction), "pulling" the hairs to different lengths and then binding the different lengths to make "bakers' bundles". Those bundles were then delivered to the paint brush factories. Machines were used for some of the individual working operations. From about 1969, brushes for carwashes were also produced. 1972 was the beginning of the production of technical brushes. In that year, a company that mainly made powdering systems for confectioneries was taken over. Occasionally, that company also produced technical brushes. Over the years, powdering systems were marketed less, and they focused more and more on the production and marketing of technical brushes as well as car wash brushes and rollers for cleaning machines. The range includes a wide choice of cylindrical brushes.

Verkkosivusto
EPA GMBH

Saksa

As a specialist in the field of electronic drive technology, we see ourselves not only as a component supplier, but also as a systems provider. Starting with engineering, through consultation and support, right up to commissioning, we provide all services, including installations on turnkey contract. Our core services are: Planning your applications, designing electrical drive components, (frequency inverter, engine, gearbox, transmitter, filter, brake resistors, etc.), commissioning and parametrisation of frequency inverters, PLC programming and automation, control cabinet construction (in cooperation with our affiliated company EPS), installation of electrical components, developing and manufacturing customer-specific EMC and line filters, EMC measurements and EMC consultation, leakage current optimisation (FI protection switch for false tripping), line analyses (harmonics, line fluctuations, etc.), suppression of radio interference in plants and equipment

Verkkosivusto
RÖMER GMBH

Saksa

Our company was established in 1989. We have more than 40 years of relevant international experience, including university degrees (Dipl.-Ing., MSc) and postgraduate management qualifications (MBA) in our respective fields. We supply renowned national and international foundries and model makers with all kinds of commodities, as well as consumer goods and wear parts for moulding, blasting and mixing systems. We are also a sales representative for the casting hammers of the PowerHammer Company. We have an export share of over 70% and conduct business in German, English and French. We will be glad to take on your challenges and look forward to hearing from you.

Verkkosivusto
DSL AIR TECHNOLOGY GMBH & CO KG

Saksa

A medium-sized company of more than 25 years' standing, we have made our name nationally and internationally in the fields of air filter technology, workplace safety and environmental protection on the basis of an ecological and socially responsible company philosophy. The "door within a door" design of our electrofilter series has become an international benchmark for technically sophisticated and easy-maintenance filter systems. For years, the continuous monitoring of developments in the design and performance of modern machine tools has given rise to more and more new electrofilter series, often in collaboration with the mechanical designers, and with the form adapted to the machine tool design. This also calls for a new design of the filter equipment, primarily the ionizer and collector cells. Today, DSL Air Technology boasts the world's largest electrofilter modification in the sector.

Verkkosivusto
SCHILDMANN PHD GMBH

Saksa

As a consultation and sales specialist, Schildmann GmbH provides all the necessary materials for silk-screen printing, as well as equipment for plate making and printing. Screen emulsions, capillary films, inkjet films for film preparation, screen laboratory equipment, "Materials for the machine", as well as smaller printing machines for screen and pad printing. Our products: Screen printing stencils; Screen stretching service; Screen printing machine accessories; Customer-specific special coating; Screen printing; Screen printing films

Verkkosivusto